LM4928TLX

• RF suppression circuit
• Full differential amplification
• Space-saving micro SMD and LLP packages
• Ultra-low current shutdown mode
• Drive capacitive loads up to 100pF
• Improved pop-up and click circuitry eliminates the noise of turning on and turn-on transitions
• 2.4 - 5.5V operation
• No output coupled capacitors, buffer network or bootstrap capacitor requirements

illustrate

The LM4928 is a stereo fully differential stereo audio power amplifier designed primarily for applications where mobile phones and other portable communications devices are demanding. It is capable of delivering a continuous average power of 1.2 watts to 8 Less than 1% distortion (THD+N) from a 5V DC supply load.

Boomer audio power amplifiers are designed to provide high-quality output power with very few external components. The LM4928 does not require an output coupling capacitor or a starter capacitor, making it ideal for use in mobile phones and other low-voltage applications where minimal power consumption is a major requirement.

The LM4928 has a low-power downtime mode. To facilitate this work, shutdown can enable logic low. In addition, the LM4928 has an internal thermal shutdown protection mechanism.

The LM4928 incorporates advanced POP and click-through noise cancellation circuitry that would otherwise occur in the on- and off-conversion process.

Key specifications:

Improved PSRR at 217Hz	90 dB (typical)
Output power at 5.0V @ 1% THD+N(8 ）	1.2W (typical)
The output power is 3.0V @ 1% THD+N(8). ）	400MW (typical)
Turn off the current	0.1μA (typical)

apply

• cell phone
• handheld computer
• Portable electronic devices and accessories