LM5110-3M
Product images are for illustrative purposes only
Product details are welcome upon request

LM5110-3M

  • Category:Driver chip
  • Product Name:Composite gate driver with 5A dual negative output voltage capability
  • Manufacturers:NSC
  • Production Batch Number:08+
  • Encapsulation:SOP-8
  • Stock Status:There is stock
  • Stock Quantity:5700
  • Minimum order quantity: 1
  • Details:Klicken Sie hier, um PDF-Informationen zum LM5110-3M zu finden
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

peculiarity

  • Drive two N-channel MOSFETs independently
  • Compound CMOS and bipolar outputs reduce output current variation
  • 5A sink/3A source current capability
  • Two channels can be connected in parallel with dual drive currents
  • Independent input (TTL compatible)
  • Fast propagation time (25 ns typical)
  • Fast rise and fall times (14 ns/12 ns ramp/drop 2 nF load)
  • Dedicated input ground pin for split power or single-supply operation (IN_REF)
  • The output swings from VCCto VEENegative phase can be entered to ground
  • Available in two non-inverting, dual inverting and combination configurations
  • Shutdown input provides a low-power mode
  • Power rails with undervoltage lockout protection
  • The pins are compatible with industry standard gate drivers

illustrate

The LM5110 dual-gate driver replaces the industry-standard gate driver with improved peak output current and efficiency. Each "composite" output drive stage consists of MOS and bipolar transistors running in parallel, sinking together over a 5A capacitive load peak. The unique feature of the combination of MOS and bipolar devices reduces current variations in drive voltage and temperature. Separate input and output ground pins provide negative drive capability, allowing the user to drive the MOSFET gate with both positive and negative VGS voltages. The gate driver control input is referenced to a dedicated input ground (IN_REF). The gate driver output swings from VCCOutput ground VEECan be IN_REF minus. MOSFETs capable of accommodating negative VGS voltages, gate driving thresholds, and low-voltage MOSFETs are often used as synchronous rectifiers to reduce losses. When traveling with conventional forward gate voltages, IN_REF and VEEThe pins are connected together and reference a common denominator. Undervoltage lockout protection and shutdown input pins are also provided. The driver can operate simultaneously with the input and output connected to the dual drive current capability. The device is available in SOIC-8 and thermally enhanced LLP-10 packages.


apply

  • Synchronous rectifier gate driver
  • Switch-mode power gate driver
  • Solenoid valves and motor drives
  • Power level translators

andLM5110-3MRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
6220.5110 Schurter Electronic Components 21+ connector 6220 POWER ENTRY MODUL 10A
726151102 Wurth Electronics 15+ SMD Inlet wirewound inductor
SFH5110-36 OSRAM 09+ DIP Infrared receiver
RM705110 TE 11+ N/A High power plug-in/panel mount relays
LM5110-3MX/NOPB NSC 10+11+   Hong Kong spot, imported original
LM5110-1SD/NOPB NSC 10+11+   Hong Kong spot, imported original
LM5110-1MX/NOPB NSC 10+11+   Hong Kong spot, imported original
LM5110-2SD/NOPB NSC 10+11+   Hong Kong spot, imported original
LM5110-3M/NOPB   10+11+   Hong Kong spot, imported original
LM5110-1M/NOPB   10+11+   Hong Kong spot, imported original
DS16EV5110ASQ/NOPB   10+11+   Hong Kong spot, imported original
LM5110-3SD/NOPB   10+11+   Hong Kong spot, imported original
DS34RT5110SQE NXP 10+ QFN48 DVI, HDMI input equalization and output de-emphasis retimer
DS34RT5110TSQ NXP 10+ LLP DVI, HDMI input equalization and output de-emphasis retimer
DS34RT5110TSQX NXP 10+ LLP DVI, HDMI input equalization and output de-emphasis retimer
DS34RT5110SQX NXP 10+ LLP DVI, HDMI input equalization and output de-emphasis retimer
DS34RT5110TSQE NXP 10+ 48-LLP DVI, HDMI input equalization and output de-emphasis retimer
DS22EV5110SQ NXP 10+ LLP DVI, HDMI Extended Reach Equalizer with Retimer and Output De-Emphasis
DS22EV5110SQX NXP 11+ SO DVI, HDMI extension for equalization and retimer
DS22EV5110SQE NXP 11+ QFN48 DVI, HDMI extension for equalization and retimer

Popular searches


Model Manufacturers lot number encapsulation illustrate
AS7C4096A-15JIN Alliance Memory Inc 23+ SOJ-36 AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE ASAHI KEIKI 2023+ weld Temperature sensor
V23154D735B110 TE 2023+ Relays Low Signal Relay - PCB V23154D 735B110
V23154D735F104 TE 23+ Relays Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20 SCHMERSAL 2023+ switch Safety gate switch
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR Honeywell 10+11+ SMD RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16

NSC brand product recommendation


Model Manufacturers lot number encapsulation illustrate
LM5110-3SDX NSC 09+ LLP Dual 5A composite gate drivers
LM5110-2M NSC 10+ LLP Dual 5A composite gate drivers
LM5110-2SDX NSC 10+ LLP Dual 5A composite gate drivers
LM5110-1SD NSC 10+ SOP-8 Dual 5A composite gate drivers
LM5110-3MX NSC 10+ SOP8 Dual 5A composite gate drivers
LM5111-1M NSC 10+ MSOP8 Dual 5A composite gate drivers
LM5111-4MY NSC 10+ MSOP8 Dual 5A composite gate drivers
LM5111-3MX NSC 09+ SOP Dual 5A composite gate drivers
LM5111-4MX NSC 10+ SOP Dual 5A composite gate drivers
LM5111-2M NSC 10+ MSOP8 Dual 5A composite gate drivers
LM5111-4MYX NSC 10+ MINI SOIC E Dual 5A composite gate drivers
LM5111-3MYX NSC 09+ SOP Dual 5A composite gate drivers
LM5111-2MYX NSC 10+ SOP Dual 5A composite gate drivers
LM5111-2MX NSC 10+ SOP-8 Dual 5A composite gate drivers
LM5111-3M NSC 10+ 8-SOIC Dual 5A composite gate drivers
LM5111-1MYX NSC 10+ MSOP8 Dual 5A composite gate drivers
LM25088QMHX-1 NSC 10+ TSSOP EXP Wide input range non-synchronous buck controller
LM25088QMH-1 NSC 10+ TSSOP EXP Wide input range non-synchronous buck controller
LM5085SD NSC 11+ LLP 42V constant on-time PFET step-down switching controller
LM25085MYE NSC 09+ eMSOP-8 42V constant on-time PFET step-down switching controller

Categorical search