peculiarity
(For 5V supply, typical values unless otherwise noted)
Rail-to-rail input CMVR - 0.25V to 5.25V
Rail-to-rail output swing 0.01V to 4.99V
The high gain bandwidth is at 20 kHz and 10 MHz
Slew rate of 12 V/μs.
Low supply current 360 microamps/AMP
Wide supply range of over 24V 2.7V
Common mode rejection ratio (CMRR) of 100 dB
Get 100 dB with R L = 10K
PSRR 82 dB
illustrate
The LM6132/34 provides a new level of speed and power in the application of low-voltage power supplies or the need to compromise before power limits. The device's 10 MHz gain bandwidth is only 360μA/amplifier supply current, supporting portable applications where new, higher power devices lose battery life unacceptable.
The LM6132/34 can drive voltages over two rails, eliminating concerns about exceeding the common mode voltage range. The output rail-to-rail output swing capability provides maximum dynamic range. This is especially important when operating at low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillation.
From 2.7V to 24V and above, the LM6132/34 is excellent for a wide range of applications, from high-speed instruments to battery-powered systems with high bandwidth requirements.
apply
Battery operating instruments
Instrumentation amplifier
Portable scanner
Wireless communication
Flat panel display drivers