peculiarity
（
V
S
= ± 15V，T
A
= 25°C, typical).
|
Available in a 5-pin SOT-23 package to save space
|
|
Greater than rail-to-rail input CMVR
|
- 15.3V to 15.3V
|
|
Rail-to-rail output swing
|
- 14.84V to 14.86V
|
|
Supply current
|
0.7 mA
|
|
Gain bandwidth
|
4.6 MHz
|
|
Slew rate
|
1.9 V/μs
|
|
Wide power supply range
|
2.7V to 32V
|
|
High power supply rejection ratio
|
106 dB
|
|
High common-mode rejection ratio
|
115 dB
|
|
Excellent gain
|
106 dB
|
|
Temperature range
|
-40°C to 125°C
|
|
Test at -40 °C, 2.7V at 125°C and 25°C, ± 5V and ± 15V
|
illustrate
The LM7341 is a rail-to-rail input and output amplifier in a small SOT-23 package over a wide supply voltage and temperature range.
The LM7341 has a 4.6 MHz gain bandwidth and a slew rate of 1.9 volts per microsecond, and draws a 0.75 mA current supply at no load.
The LM7341 is tested at -40°C, 125°C and 25°C with modern automated test equipment.
Detailed performance specifications at 2.7V, ± 5V, ± 15V, and over a wide temperature range make the LM7341 a good choice for automotive, industrial and other demanding applications.
The rail-to-rail input common-mode range ± 15V common-mode rejection min. 76 dB makes the LM7341 a good choice for both high-end and low-end remote sensing applications.
The performance of the LM7341 is consistent over a wide voltage range, and the supply voltage can be varied in applications such as automotive electrical systems and battery-powered electronics, useful parts.
The LM7341 uses a small SOT23-5 package that occupies little board space and can be placed close to the signal source to reduce noise pickup.
apply
-
Car
-
Industrial robots
-
Sensor output buffer
-
Multi-voltage power supply
-
Reverse photodiode bias
-
Low current optocoupler
-
High-side detection
-
compare
-
Battery charger
-
Test point output buffer
-
Sub-ground current sensing