LMC660CMX

• Rail-to-rail output swing
• Specify 2 K and 600 load
• High voltage gain: 126 dB
• Low input offset voltage: 3 mV
• Low offset voltage drift: 1.3μV/°C
• Ultra-low input bias current: 2 fA
• The input common-mode range includes V^-
• The operating range is from +5 V to 15.5 V supplies
• I_SS= 375μA/amplifier, independent V⁺
• Low distortion: 0.01% 10 kHz
• Slew rate: 1.1 V/μs

illustrate

The LMC660 CMOS op amp is ideal for single-supply operation. It uses a +5 V to 15.5 V and functional rail-to-rail output swing in addition to the input common-mode range, including ground. Exhibiting the confusion that in the past the limitations of CMOS amplifiers were not having problems with this design. Enter V_OS，Drift and broadband noise as well as voltage gain for realistic loads (2 K and 600 are better than or greater than the widely accepted bipolar equivalent.

The chip is built with the state's advanced bipolysilicon gate CMOS process.

See the dual CMOS with these same functions, op amp LMC662 datasheet.

apply

• High impedance buffers or preamplifiers
• Precision current-to-voltage converters
• Long-term points
• Sample-and-hold circuits
• Peak detector
• Medical instruments
• Industrial control
• Automotive sensors