peculiarity
(Unless otherwise specified, V S = ± 5V, T = 25°C, typical).
|
Voltage feedback architecture
|
|
|
unit gain bandwidth
|
250 MHz
|
|
Supply voltage range
|
± 2.5V to ± 6V
|
|
Swing rate
|
200 volts/microsecond
|
|
Supply current
|
4.5 mA/channel
|
|
Input common mode voltage
|
- 5.15V to +3.7 V
|
|
Output Voltage Swing (R L = 100Ω)
|
- 3.6V to 3.4V
|
|
Input voltage noise
|
4.5 NV / √ hertz
|
|
Input current noise
|
1.7 pA/ √ hertz
|
|
Establishment Time: 0.01%
|
25 nanoseconds
|
illustrate
LMH6654/LMH6655 single and dual high-speed, voltage feedback amplifiers are designed with a 250 MHz bandwidth of unity gain stable operation. Operates ± 2.5V to ± 6V and consumes only 4.5 mA per channel. The amplifier has very low voltage noise and a wide output swing to maximize the signal-to-noise ratio of the signal.
The LMH6654/LMH6655 has a true single-supply capability with an input common-mode voltage range extended below the positive rail 1.3V 150mV within the negative power rail.
The combination of high speed and low power consumption LMH6654/LMH6655 makes many of these products an ideal choice for portable, high-speed applications at a power premium.
LMH6654 are available in 5-pin SOT-23 and 8-pin SOIC packages. LMH6655 is available in 8-pin MSOP and 8-pin SOIC packages.
LMH6654/LMH6655 is a state-built advanced VIP10 (vertically integrated PNP) complementary bipolar process.
apply
- ADC drivers
- Consumer video
- Active filter
- Pulse delay circuit
- xDSL receiver
- Preamp
|