LMP7702MMX

• Product Introduction

peculiarity

Typical values at V S = 5V unless otherwise noted

illustrate

The LMP7701/LMP7702/LMP7704 are single, double and quadruple low offset voltage, rail-to-rail inputs and outputs with CMOS high-precision amplifier input stages and a wide supply voltage range each. The LMP7701/LMP7702/LMP7704 is part of LMP's family of high-precision amplifiers and is ideal for sensor interfaces and other instrumentation applications.

Ensure low offset voltages less than ± 200μV and ensure low input bias of more than ± 1 pA, making LMP7701 ideal for high-precision applications. The LMP7701/LMP7702/LMP7704 is built to utilize VIP50 technology, which allows for a CMOS input stage and a 12V common mode and supply voltage range combined. This makes LMP7701/LMP7702/LMP7704 a great choice in many applications where traditional CMOS components cannot operate at the required voltages.

The LMP7701/LMP7702/LMP7704 have a rail-to-rail input stage that greatly reduces CMRR glitches and typically has a rail-to-rail input amplifier. This is done by trimming the free input stage sides, reducing the difference between NMOS and PMOS offset between them. 40 millivolts of LMP7701/LMP7702/LMP7704 fluctuation output on either rail maximizes signal dynamic range in applications requiring low supply voltages.

The LMP7701 is to provide a savings in a 5-pin SOT23 package and an 8-pin SOIC package. LMP7702 are available in 8-pin SOIC and 8-pin MSOP packages. Fourth, the LMP7704 provided are in 14-pin SOIC and 14-pin TSSOP packages. These small packages of printed circuit boards are an ideal solution for area constraints and portable electronics.

apply