LMP7707MAX

• Product Introduction

peculiarity

Typical values at V S = 5V unless otherwise noted.

illustrate

The LMP7707/LMP7708/LMP7709 devices are single, dual, and quadruple low-offset, rail-to-rail input and output precision amplifiers, each with a CMOS input stage and a wide supply voltage range. The LMP7707/LMP7708/LMP7709 is part of LMP's family of high-precision amplifiers and is ideal for sensor interfaces and other instrumentation applications. These decompensated amplifiers stabilize at 6 and higher gains.

Ensure low offset voltage less than ± 200μV Ensure low input bias greater than ± 1 pA, and LMP7707/LMP7708/LMP7709 ideal current for high-precision applications. The LMP7707/LMP7708/LMP7709 is built to utilize VIP50 technology, which allows a combination of a CMOS input stage and a rail-to-rail common-mode voltage range of 12V supply voltage. This LMP7707/LMP7708/LMP7709 is the best choice for many applications where traditional CMOS devices cannot operate due to voltage conditions.

The unique design of each rail-to-rail input stage LMP7707/LMP7708/LMP7709 greatly reduces CMRR glitches and typically features rail-to-rail input amplifiers. Both sides of the free input stage are shaved off, reducing the difference between NMOS and PMOS offsets. Whether it is the railway output swing at 40 millivolts, the signal dynamic range is maximized in applications requiring low supply voltages.

The LMP7707 is available in a saving-on 5-pin SOT23 package and an 8-pin SOIC package, LMP7708 in an 8-pin MSOP and 8-pin SOIC package, LMP7709 a four-pin 14-pin SOIC package available in a 14-pin TSSOP. These small packages of printed circuit boards are an ideal solution for area constraints and portable electronics.

apply