home page>Product Center> Operational amplifiers

Product images are for illustrative purposes only
Product details are welcome upon request

LMP7718MMX

Category:Operational amplifiers
Product Name:88 MHz, precision, low noise, 1.8V CMOS input, decompensated operational amplifier
Manufacturers:NXP
Production Batch Number:10+
Encapsulation:MSOP8
Stock Status:There is stock
Stock Quantity:8144
Minimum order quantity: 1
Details:

Product introduction

(Typical 5V power supply, unless otherwise noted)

Input offset voltage	± 150μV Max
Input reference voltage noise	5.8 NV / √ hertz
Input bias current	100 FA
Gain-bandwidth product	88 MHz
Supply voltage range	1.8V to 5.5V

Supply current per channel

LMP7717	1.15 mA
LMP7718	1.30 mA

Rail-to-rail output swing

@ 10kΩ load	Railway from 25 millivolts
@ 2kΩ load	Railway from 45 millivolts

Guaranteed 2.5V and 5.0V performance
Total harmonic distortion	600 Ω at 0.04% @ 1 kHz
Temperature range	-40°C to 125°C

illustrate

The (single) LMP7717 and LMP7718 (dual) low noise, CMOS input op amps provide low input voltage noise density of 5.8 NV/ At the same time, it consumes only 1.15 milliamps (LMP7717) of quiescent current. The LMP7717/LMP7718 are gain-bandwidth (GBW) products with stable gains of 10 and 88 MHz. The LMP7717/LMP7718 have a supply voltage range of 1.8V to 5.5V and can be operated from a single supply. The LMP7717/LMP7718 each have a rail-to-rail output stage. These amplifiers are part of the LMP family of precision amplifiers and are ideal for a variety of instrumentation applications.

The LMP7717 family provides the best performance in low voltage and low noise systems. The CMOS input stage, typical input bias current within a few femtosecond amperes, and input common-mode voltage range, including ground, make the LMP7717/LMP7718 ideal for applications requiring high speed and low power sensors.

LMP7717/LMP7718 is manufactured using the national advanced VIP50 process. The LMP7717 is available in a 5-pin SOT - 23- or 8-pin SOIC package. The LMP7718 is available as an 8-pin SOIC or an 8-pin MSOP.

apply

ADC interface
Photodiode amplifier
Active filters and buffers
Low noise signal processing
Medical instruments
Sensor interface applications

andLMP7718MMXRelated ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
LMP7718MMX	NXP	10+	MSOP8	88 MHz, precision, low noise, 1.8V CMOS input, decompensated operational amplifier

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board

NXP brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
LMP7721MAX	NXP	10+	SOP	Current precision amplifier
LMP7721MAE	NXP	10+	SOP	Current precision amplifier
LMV641MA	NXP	09+	SOP-8	12V, low power amplifier at 10 MHz
LMV641MGX	NXP	11+	SC70-5	12V, low power amplifier at 10 MHz
LMV641MGE	NXP	11+	SOP8	12V, low power amplifier at 10 MHz
LMV641MAX	NXP	09+	SOP	12V, low power amplifier at 10 MHz
LMV651MGX	NXP	08+	SC70-5	Low voltage, low power amplifier at 12 MHz
LMV651MFX	NXP	09+	SOT-23	Low voltage, low power amplifier at 12 MHz
LMV651MF	NXP	11+	SOT23-5	Low voltage, low power amplifier at 12 MHz
LMV651MG	NXP	10+	SC70-5	Low voltage, low power amplifier at 12 MHz
LMV652MMX	NXP	10+	MSOP-8	Low voltage, low power amplifier at 12 MHz
LMV716MMX	NXP	11+	MSOP8	5 MHz, low noise dual operational amplifier
LMV716MM	NXP	10+	MSOP	5 MHz, low noise dual operational amplifier
LM7332MA	NXP	10+	SOP-8	Dual, rail-to-rail input/output, 30V, wide voltage range, high output op amp
LM7332MME	NXP	10+	SOP	Dual, rail-to-rail input/output, 30V, wide voltage range, high output op amp
LM7332MMX	NXP	10+	MSOP8	Dual rail-to-rail input/output, wide operating voltage range, output, high speed operational amplifier
ADC121C021CIMK	NXP	10+	TSOT-6	12-bit analog-to-digital converter
ADC11DV200CISQ	NXP	10+	60-LLP	Low-power A/D conversion of dual 11-bit, 200 MSPS parallel LVDS/CMOS outputs
ADC11DV200CISQE	NXP	11+	SO	Low-power A/D conversion of dual 11-bit, 200 MSPS parallel LVDS/CMOS outputs
ADC11DV200CISQX	NXP	11+	SO	Low-power A/D conversion of dual 11-bit, 200 MSPS parallel LVDS/CMOS outputs

LMP7718MMX

andLMP7718MMXRelated ICs are:

Popular searches

NXP brand product recommendation

Categorical search

Related Links