LMV431BIMFX

• Product Introduction

peculiarity

Low Operating Voltage/Wide Regulation Range (1.24V/30V) 0.5% initial error (LMV431B) Temperature-compensated industrial temperature range (LMV431AI of 39 ppm/°C) Low Operating Current (55μA) Low output impedance (0.25 ) Quick start response Low cost

illustrate

The LMV431, LMV431A and LMV431B 1.24V precision shunt regulators can be adjusted to 30V. The cathode voltage is controlled from the negative feedback adjustment pin, much like a non-inverting op amp configuration (reference symbol and function diagram). A resistor divider terminates the gain of a 1.24V bandgap reference controlled by the regulating pin. The cathode short-circuit adjustment pin (voltage follower) provides a cathode voltage of 1.24V.

With initial tolerances of 1.5%, 1% and 0.5% for the LMV431 LMV431A and LMV431B, respectively, the features are suitable for several applications that require their type of performance at low voltage Zener diodes. Applications include: 3V to 2.7V low-dropout regulators, error amplifiers in 3V off-line switching regulators, and even as a voltage detector. These parts are typically greater than 10nF and more than 50pF capacitive load stabilized.

The LMV431, LMV431A and LMV431B offer performance at a competitive price.

apply

Parallel voltage regulator Series voltage regulators Current source or Sink Voltage monitor Error amplifier 3V offline switching voltage regulation Low differential N-channel series voltage regulator