- Ultra-low power consumption of 0.7μA
- Wide supply voltage range from 2V to 8V
- The input is outside the common-mode range, V+and V-
- Open-collector and push-pull outputs
- High output current drive: ( @VS = 5V) 45 mA
- Propagation delay（VS = 5V, 10 mV overdrive) 25 microseconds
- Available in a 5-pin SOT23 package
- Latch-off resistor> 300 mA
illustrate
The LMC7215/LMC7225 low-power comparators feature a maximum supply current of over 1μA. They are designed to operate over a wide range of supply voltages from 2V to 8V.
The LMC7215/LMC7225 have a rail-to-rail common-mode voltage range. This is a real advantage in single-supply applications.
The LMC7215 features a push-pull output stage. This feature allows the absolute minimum repayment operation of power consumption when driving any load.
LMC7225 function, open-drain output. By connecting an external resistor, the output of the comparator can be used as a level shift to any voltage required up to 15V high.
The LMC7215/LMC7225 are designed for low power systems where the most important parameters.
With a guaranteed supply voltage of 2.7V to 5V and rail-to-rail performance, operation is ideal for battery-powered applications.
apply
- laptop
- cell phone
- Metrology system
- Hand holding electronic
- RC timer
- Alarm and monitoring circuits
- Window comparator, multivibrator
|