LMV791MK

• Product Introduction

peculiarity (Typical 5V supply, unless otherwise noted) Input reference voltage noise 5.8 NV / √ Hz Input bias current 100 FA unit gain bandwidth 17 MHz Enable mode per channel, current LMV791 1.15 mA LMV792 1.30 mA Supply current per channel in shutdown mode 0.02μA Rail-to-rail output swing @ 10kΩ load Railways from 25 mV @2kΩ load Railways from 45 mV Guaranteed 2.5V and 5.0V performance Total harmonic distortion 0.01% @ 1 kHz, 600Ω Temperature range -40°C to 125°C illustrate The LMV791 (single) and LMV792 (dual) low-noise, CMOS input op-amps provide a low input voltage noise density of 5.8 NV/situ while consuming only 1.15 mA (LMV791) of quiescent current. The LMV791 and LMV792 are unity-gain stable op-amps with a gain bandwidth of 17 MHz. The LMV791/LMV792 has a supply voltage range of 1.8V to 5.5V and can be operated from a single supply. The LMV791/LMV792 are each functional rail-to-rail output stage capable of driving 600Ω loads and procuring currents up to 60 mA. The LMV791 family offers optimal performance in low voltage and low noise systems. The CMOS input stage, with typical input bias currents in several femtoAmperes ranges, input common-mode voltage ranges, including ground-based LMV791 and LMV792 low-power sensor applications. The LMV791 family has a built-in enabled feature that can be used to optimize power consumption for low-power applications. The LMV791/LMV792 are manufactured using the state-advanced VIP50 process and are available in 6-pin TSOT23 and 10-pin MSOP packages, respectively.   apply Photodiode amplifiers Active filters and buffers Low-noise signal processing Medical instruments Sensor interface applications