LMV794MMX

• Product Introduction

 peculiarity (Typical 5V supply, unless otherwise noted) Input reference voltage noise 5.8 NV / √ Hz Input bias current 100 FA Gain bandwidth accumulation 88 MHz Current supplied to each channel LMV793 1.15 mA LMV794 1.30 mA Rail-to-rail output swing @ 10kΩ load Railways from 25 mV @2kΩ load Railways from 45 mV Guaranteed 2.5V and 5.0V performance Total harmonic distortion 0.04% @ 1 kHz, 600Ω Temperature range -40°C to 125°C illustrate The LMV793 (single-channel) and LMV794 (dual) CMOS input op-amps provide a low input voltage noise density of 5.8 NV while consuming only 1.15 mA (LMV793) of quiescent current. The LMV793/LMV794 is a steady gain of 10 and has a gain bandwidth product (GBW) of 88 MHz. The LMV793/LMV794 has a supply voltage range of 1.8V to 5.5V and can be operated from a single supply. Each function rail-to-rail output stage of the LMV793/LMV794 is capable of driving 600Ω loads and procuring currents up to 60 mA. The LMV793/LMV794 offers optimal performance in low voltage and low noise systems. The CMOS input stage, typical input bias current in the range of a few femtosecond amps, and the input common-mode voltage range, which includes ground, make the LMV793/LMV794 ideal for high-speed low-power sensor applications that require it. LMV793/LMV794 is manufactured by the national advanced VIP50 process. The LMV793 is available in a 5-pin SOT23 or 8-pin SOIC package. The LMV794 is available as an 8-pin SOIC or 8-pin MSOP.   apply ADC interface Photodiode amplifiers Active filters and buffers Low-noise signal processing Medical instruments Sensor interface applications