home page>Product Center> Operational amplifiers

Product images are for illustrative purposes only
Product details are welcome upon request

LMV796MFX

Category:Operational amplifiers
Product Name:17 MHz, low noise, CMOS input, 1.8V op amp
Manufacturers:NXP
Production Batch Number:11+
Encapsulation:SOT23-5
Stock Status:There is stock
Stock Quantity:30000
Minimum order quantity: 1
Details:

Product introduction

(Typical 5V power supply, unless otherwise noted)

Input reference voltage noise	5.8 NV /
Input bias current	100 FA
Unity-gain bandwidth	17 MHz

Supply current per channel

LMV796/LMV796Q	1.15 mA
LMV797	1.30 mA

Rail-to-rail output swing

@ 10kΩ load	Railway from 25 millivolts
@ 2kΩ load	Railway from 45 millivolts

Guaranteed 2.5V and 5.0V performance
Total harmonic distortion	600Ω at 0.01% @ 1kHz
Temperature range	-40°C to 125°C
LMV796Q is an automotive grade AEC - Q100 standard Class 1 qualified product, which is the production of automotive grade flow.

illustrate

LMV796/LMV796Q (single) and LMV797 (dual) low noise, CMOS input op amps provide low input voltage noise density of 5.8 NV / At the same time, it consumes only 1.15 milliamps (LMV796/LMV796Q) of quiescent current. The LMV796/LMV796Q and LMV797 are unity gain stable operational amplifiers with a gain bandwidth of 17 MHz. The LMV796/LMV796Q/LMV797 have a supply voltage range of 1.8V to 5.5V and can be operated from a single supply. The LMV796/LMV796Q/LMV797 are rail-to-rail output stages capable of driving 600Ω loads and sourcing up to 60 mA per functional rail-to-rail output stage.

The LMV796/LMV796Q family offers the best performance in low voltage and low noise systems. The CMOS input stage, typical input bias current in several femtoAmperes ranges, and input common-mode voltage range, including ground, make the LMV796/LMV796Q and LMV797 ideal for low-power sensor applications.

LMV796/LMV796Q/LMV797 is manufactured using the national advanced VIP50 process. The LMV796/LMV796Q are available in a 5-pin SOT23 package. The LMV797 is available in an 8-pin MSOP package.

apply

Photodiode amplifier
Active filters and buffers
Low noise signal processing
Medical instruments
Sensor interface applications
Car

andLMV796MFXRelated ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
DS92LV3241TVSX	NXP	10+	LLP	20-85 MHz 32-bit channel connection serial
DS92LV3242TVS	NXP	11+	QFP64	20-85 MHz 32-bit channels connect to the II deserializer
DS92LV3221TVS	NXP	11+	QFP64	20-50 MHz 32-bit channel connection serial
LPV531MKX	NXP	10+	TSOT-23-6	Programmable microCMOS input, rail-to-rail output op amp
LPV531MK	NXP	10+	TSOT-6	Programmable microCMOS input, rail-to-rail output op amp
LMV797MMX	NXP	10+	MSOP-8	17 MHz, low noise, CMOS input, 1.8V op amp
LMV791MK	NXP	10+	SOT23-6	17 MHz, low noise, CMOS input, 1.8V off op amp
LMV792MMX	NXP	10+	SOP	88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV792MM	NXP	10+	SOP	88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MFX	NXP	10+	SOT23-5	88 MHz, low noise, 1.8V CMOS input, compensatory op amp

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board
E2E-X7D212-R2M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D212-R5M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D112-R5M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D112-R2M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D112-R	Omron	2023+	sensor	Standard Proximity Sensor
AF16ZB-30-10RT-23	ABB	2023+	Contactors	Contactor 48-130V50/60HZ-DC Contactor
TNL22ERT	ABB	2023+	Relays	ABB-CONTACTORS,OLS,MMPS - TRACTION AND RAIL, A LINE
AF-16ZB-22-00RT-22	ABB	2023+	Relays	Contactor 48-130V50/60HZ-DC Contactor
FRCIR06RGG32-8SF80T12	ITT Interconnect Solutions	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
ABMPQ20SA	AB Connectors	2023+	connector	Contact, quadrax, female, sz 20 inner ct

NXP brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
LMV797MMX	NXP	10+	MSOP-8	17 MHz, low noise, CMOS input, 1.8V op amp
LMV791MK	NXP	10+	SOT23-6	17 MHz, low noise, CMOS input, 1.8V off op amp
LMV792MMX	NXP	10+	SOP	88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV792MM	NXP	10+	SOP	88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MFX	NXP	10+	SOT23-5	88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MAX	NXP	10+	SOP	88 MHz, low noise, 1.8V CMOS input, compensated for the PowerWise ® series of operational amplifiers
LMV793MA	NXP	10+	SOP8	88 MHz, low noise, 1.8V CMOS input, compensated for the operational amplification of the PowerWise ® series
LMV793MF	NXP	11+	SOT-23-5	88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV794MMX	NXP	10+	MSOP-8	88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV861MGX	NXP	08+	SC70-5	Single 30 MHz low-power CMOS, hardened operational amplifier
LMV861MGE	NXP	10+	SC70-5	Single 30 MHz low-power CMOS, hardened operational amplifier
LMV861MG	NXP	11+	SC70-5	Single 30 MHz low-power CMOS, hardened operational amplifier
LMV862MM	NXP	10+	MSOP-8	Dual 30 MHz low-power CMOS, hardened operational amplifiers
DAC081C081CISDX	NXP	10+	LLP	8-bit micropower digital-to-analog converter
DAC081C081CISD	NXP	09+	LLP	8-bit micropower digital-to-analog converter
DAC081C081CIMK	NXP	11+	SOT23-6	10-bit micropower digital-to-analog converter
DAC081C085CIMMX	NXP	10+	MSOP8	10-bit micropower digital-to-analog converter
DAC081C085CIMM	NXP	10+	MSOP8	10-bit micropower digital-to-analog converter
DAC081C081CIMKX	NXP	11+	TSOT23-6	10-bit micropower digital-to-analog converter
DAC101S101QCMKX	NXP	11+	TSOT23-6	10-bit micropower, RRO digital-to-analog converter

LMV796MFX

andLMV796MFXRelated ICs are:

Popular searches

NXP brand product recommendation

Categorical search

Related Links