LMV797MMX

• Product Introduction

 peculiarity (Typical 5V supply, unless otherwise noted) Input reference voltage noise 5.8 NV / Input bias current 100 FA unit gain bandwidth 17 MHz Current supplied to each channel LMV796/LMV796Q 1.15 mA LMV797 1.30 mA Rail-to-rail output swing @ 10kΩ load Railways from 25 mV @2kΩ load Railways from 45 mV Guaranteed 2.5V and 5.0V performance Total harmonic distortion 0.01% @ 1kHz, 600Ω Temperature range -40°C to 125°C LMV796Q is an automotive-grade AEC-Q100 standard Level 1 qualified product, which is the production of automotive-grade flow. illustrate The LMV796/LMV796Q (single) and LMV797 (dual) low-noise, CMOS input operational amplifiers provide a low input voltage noise density of 5.8 NV while consuming only 1.15 mA (LMV796/LMV796Q) of quiescent current. The LMV796/LMV796Q and LMV797 are unity-gain stable operational amplifiers with a gain bandwidth of 17 MHz. The LMV796/LMV796Q/LMV797 has a supply voltage range of 1.8V to 5.5V and can be operated from a single supply. Each function rail-to-rail output stage of the LMV796/LMV796Q/LMV797 is capable of driving 600Ω loads and procuring currents up to 60 milliamps. The LMV796/LMV796Q home provides the best performance of low-voltage and low-noise systems. The CMOS input stage, typical input bias current in several femtoAmperes ranges, and input common-mode voltage range, including ground, make the LMV796/LMV796Q and LMV797 ideal for low-power sensor applications. LMV796/LMV796Q/LMV797 is manufactured using the national advanced VIP50 process. The LMV796/LMV796Q is available in a 5-pin SOT23 package. The LMV797 is available in an 8-pin MSOP package.   apply Photodiode amplifiers Active filters and buffers Low-noise signal processing Medical instruments Sensor interface applications Car