peculiarity
Unless otherwise noted, typical values are in T=25℃， VSUPPLY= 3.3V
|
Supply voltage
|
2.7V to 5.5V
|
|
Supply current (per channel)
|
0.4 mA
|
|
Input offset voltage
|
The maximum is 1 mV
|
|
Input bias current
|
0.1 Pa
|
|
GBW
|
8 MHz
|
|
EMIRR at 1.8 GHz
|
87 dB
|
|
Input noise voltage at 1 kHz
|
11 NV / √ hertz
|
|
Slew rate
|
4.5 V/μs
|
|
Output voltage swing
|
Rail to rail
|
|
Output current driven
|
30 mA
|
|
Operating ambient temperature range
|
-40°C to 125°C
|
illustrate
State's LMV851/LMV852/LMV854 CMOS input, low-power op amp ICs offer low input bias current, a wide temperature range of -40°C to 125°C and superior performance that makes them a powerful general-purpose part. In addition, the LMV851/LMV852/LMV854 EMI hardening to minimize any interference, making them ideal for EMI sensitive applications. The unity-gain stable LMV851/LMV852/LMV854 features 8 MHz bandwidth while consuming only 0.4 mA per channel. These components also maintain a large capacitive load of 200 pF. The LMV851/LMV852/LMV854 offer superior performance in terms of power and space utilization and economy. This part of the family has a maximum input offset voltage of 1 mV, rail-to-rail output stage, and input common-mode voltage range, including ground. The LMV851/LMV852/LMV854 operate from 2.7V to 5.5V with supply voltages ranging from 2.7V to 5.5V, providing a CMRR of 92 dB and a PSRR of 93 dB. The LMV851/LMV852/LMV854 are available in space-saving 5-pin SC70, 8-pin MSOP, and 14-pin TSSOP packages.
apply
- Photodiode preamplifier
- Piezoelectric sensors
- Portable/battery-powered electronic devices
- Filter/buffer
- Pocket PC/mobile phone accessories
- Medical diagnostic equipment
|