home page>Product Center> Low dropout linear regulator
LP38502ASD-ADJ
Product images are for illustrative purposes only
Product details are welcome upon request

LP38502ASD-ADJ

  • Category:Low dropout linear regulator
  • Product Name:The 1.5A low-dropout linear regulator FlexCap has a 2.7V to 5.5V input
  • Manufacturers:NSC
  • Production Batch Number:10+
  • Encapsulation:LLP
  • Stock Status:There is stock
  • Stock Quantity:10000
  • Minimum order quantity: 1
  • Details:Click here to find pdf information on the LP38502ASD-ADJ
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

peculiarity

  • FlexCap: Stable with ceramic, tantalum capacitors or aluminum
  • Stable with 10μF input/output capacitance
  • Adjustable output voltage from 0.6V to 5V
  • Low ground pin current
  • 25 nA quiescent current shutdown mode
  • The guaranteed output current is 1.5A
  • Available in TO-263, TO-263 thin, LLP-8 packages
  • Guarantee VADJAccuracy of ± 1.5% @ 25°C (Class A)
  • Guaranteed accuracy of ± 3.5% @ 25°C (STD)
  • Overtemperature and overcurrent protection
  • -40°C to +125°C operating rangeTJ
  • Enable Pin (LP38502)

illustrate

National Semiconductor's FlexCap LDO features unique compensation, allowing any type of output capacitor with no limit on the use of minimum or maximum ESR. The LP38500/2 series of low-dropout linear regulators operates from a +2.7 V to +5.5 V input supply. These ultra-low dropout linear regulators respond very quickly to intervene in the load, which makes them suitable for changes in low voltage microprocessor applications. In CMOS process development (utilizing a PMOS transistor), the low quiescent current of the LP38500/2 does not vary much from the load current.

Ground pin current: Typically 2 mA load current is 1.5A.

Disable mode: The enable pin is typically pulled low at 25 nA quiescent current.

Simplified compensation: As with any type of output capacitor, ESR is both stable.

Precision output: "A" with 1.5% VADJTolerance (25 ° C) and above line, load and temperature grade versions are available 3%.


apply

  • ASIC power supply:

  • Printer, drawing card, DVD player

  • Set-top boxes, copiers, routers
  • DSP and FPGA power supplies
  • Switching power supply regulators
  • Convert from 3.3V or 5V rails

andLP38502ASD-ADJRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
LP38502ASD-ADJ/NOPB   10+11+   Hong Kong spot, imported original
LP38502ASDX-ADJ NSC 10+ LLP 3A FlexCap低压差线性稳压
LP38502ASD-ADJ NSC 10+ LLP The 1.5A low-dropout linear regulator FlexCap has a 2.7V to 5.5V input

Popular searches


Model Manufacturers lot number encapsulation illustrate
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62 ABB 2016+ Contactors 4P St Contactor Relay 77-143Vdc |Abb TNL22ERT-62
62EM1-00001 Microchip 2023+ Development board AgileSwitch® 62mm Electrical Master SiC Gate Driver Board

NSC brand product recommendation


Model Manufacturers lot number encapsulation illustrate
LP38501TSX-ADJ NSC 10+ TO-263 The 3A FlexCap low dropout linear regulator is available from a 2.7V to 5.5V input
LP38500SD-ADJ NSC 11+ LLP-8 The 1.5A low-dropout linear regulator FlexCap has a 2.7V to 5.5V input
LP38500ASD-ADJ NSC 10+ LLP The 1.5A low-dropout linear regulator FlexCap has a 2.7V to 5.5V input
LP3470M5-3.08 NSC 09+ SOT23-5 Tiny power-on reset circuit
LP3470IM5-4.63 NSC 10+ SOT23-5 Tiny power-on reset circuit
LP3470IM5-4.38 NSC 11+ SOT23-5 Tiny power-on reset circuit
LP339MX NSC 10+ SOP14 Ultra-low power quad comparator
LP2998MRX NSC 10+ SOP8 DDR-I and DDR-II termination regulators
LP2998MR NSC 10+ PSOP DDR-I and DDR-II termination regulators
LP2998MAX NSC 10+ SOIC NARROW DDR-I and DDR-II termination regulators
LP2997MX NSC 09+ SOP8 DDR-II termination regulator
LP2997MRX NSC 10+ PSOP-8 DDR-II termination regulator
LP2997MR NSC 09+ PSOP-8 DDR-II termination regulator
LP2997M NSC 09+ SOP-8 DDR-II termination regulator
LP2996MX NSC 10+ SOP-8 DDR termination regulator
LP2996MRX NSC 10+ SOP-8 DDR termination regulator
LP2996M NSC 09+ SOP-8 DDR termination regulator
LP2992AIM5-3.3 NSC 11+ SOT23-5 The micropower 250 mA low noise ultra-low dropout regulator is designed in an LLP package with SOT-23 and very low ESR output capacitors
LP2989IMX-3.3 NSC 10+ NSOIC8 Micro/low noise, 500 mA ultra-low dropout regulator
LP2985IM5-5.0 NSC 09+ SOT23-5 The micro 150 mA low noise ultra-low dropout regulator is available in SOT-23 and miniature SMD packages

Categorical search