- FlexCap: Stable with ceramic, tantalum, aluminum capacitors
- 10μF input/output capacitance stability
- Adjustable output voltage from 0.6V to 5V
- Low ground pin current
- 25 nA quiescent current in shutdown mode
- The guaranteed output current is 1.5A
- Available in TO-263, TO-263 film, and LLP-8 packages
- Guarantee V ADJ. Accuracy± 1.5% @ 25°C (Class A)
- Guaranteed accuracy± 3.5% @ 25°C (STDs)
- Overheat and overcurrent protection
- Operating T J range from -40°C to +125°C
- Enable Pin (LP38502)
illustrate
The unique feature compensation of the National FlexCap LDO allows the use of any type of output capacitor with no minimum or maximum ESR restrictions. The LP38500/2 series low-dropout linear regulators operate from a +2.7 V to +5.5 V input supply. These ultra-low dropout linear regulators respond very quickly to one-step loads, which makes them suitable for use in variations in low-voltage microprocessor applications. A CMOS process (utilizing PMOS bypass transistors) was developed with LP38500/2 with low quiescent current and small load current variations.
Ground Pin Current: Typically 2 mA load current of 1.5A.
Ban Mode: Typically 25 NA quiescent current when the enabling pin is pulled down.
Simplified Compensation: With any type, regardless of the output capacitance of the ESR.
Precision Output: "One" can be used with 1.5% V ADJ. Tolerance (25°C) and more than 3% line, load and temperature class versions.
apply
- Printer, graphics card, DVD player
- Set-top boxes, copiers, routers
- Power supplies for DSPs and FPGAs
- Switching power supply regulator
- Conversion from a 3.3V or 5V supply
|