- Ultra-low differential pressure
- Stabilized with selected ceramic capacitors
- Low ground pin current
- 0.06% load regulation
- 10nA quiescent current in shutdown mode
- The guaranteed output current is 1.5A DC
- Available in TO-263, TO-220 and SOT-223 packages
- Output voltage accuracy± 1.5%
- ^Error flag indicates output status
- Sensing options improve load regulation
- Overtemperature/overcurrent protection
- -40°C to +125°C junction temperature range
illustrate
The LP3852/LP3855 fast ultra-low dropout linear regulator series operates from +2.5 V to +7.0 V input supplies. A wide range of preset output voltage options are available. These ultra-low dropout linear regulators react very quickly to one-step loads, which makes them suitable for low voltage microprocessor applications. The LP3852/LP3855 have been developed using a CMOS process that allows low quiescent current operation with independent output load currents. This CMOS process also allows the LP3852/LP3855 to operate at very low dropout pressures.
Differential pressure: Ultra-low dropout voltage typically at 150mA load current and 240mV at 1.5A load current.
Ground pin current: Typically 4 mA at 1.5A load current.
Shutdown mode: Quiescent current is typically 10nA when the shutdown pin is pulled low.
^Error flag: ^Error flag becomes low when the output voltage drops below 10% of the nominal value.
Read out: Needle feel improves at remote load regulation.
Precision output voltage: Multiple output voltage options are available ranging from 1.8V to 5.0V, one guaranteed to be ± 1.5% ± 3.0% accuracy at room temperature (different lines, loads, and temperatures).
apply
- Microprocessor power supply
- BTL, GTL, GTL+ and SSTL bus terminations
- The power supply for the DSP
- The end of SCSI
- Postal regulators
- High efficiency linear regulator
- Battery charger
- Other battery-powered applications
|