LP3852ES-2.5

• Ultra-low differential pressure
• Stable with selected ceramic capacitors
• Low ground pin current
• Load regulation rate 0.06%
• 10nA quiescent current in shutdown mode
• The guaranteed output current is 1.5A DC
• Available in TO-263, TO-220, and SOT-223 packages
• Output Voltage Accuracy± 1.5%
• ^Error flag indicates output status
• Sensing options improve load regulation
• Overheat/overcurrent protection
• Junction temperature range from -40°C to +125°C

illustrate

The LP3852/LP3855 series of fast ultra-low dropout linear regulators operate from +2.5 V to +7.0 V input supplies. A wide range of preset output voltage options are available. These ultra-low dropout linear regulators respond very quickly to one-step loads, which makes them suitable for use in variations in low-voltage microprocessor applications. The LP3852/LP3855 have been developed using a CMOS process that allows low quiescent current operation with independent output load current. This CMOS process also allows the LP3852/LP3855 to operate at very low differential pressure conditions.

Differential pressure: Ultra-low dropout, typically at 150mA load current and 240mV at 1.5mV at 1.5mV.

Ground Pin Current: Typically 4 mA at 1.5A load current.

Shutdown mode: Typically 10nA quiescent current when the shutdown pin is pulled down.

^Error flags: ^The error flag becomes low when the output voltage drops below 10% of the nominal value.

Read out: Needle feeling, improved load adjustment in the remote area.

Precision Output Voltage: A wide range of output voltage options are available from 1.8V to 5.0V, a condition that guarantees accuracy of ± 1.5% ± 3.0% at room temperature (different lines, loads, and temperatures).

apply

• Microprocessor power supply
• BTL, GTL, GTL+ and SSTL bus terminals
• DSP power supply
• SCSI terminated
• Postal Regulatory Authority
• High-efficiency linear regulator
• Battery charger
• Other battery-powered applications