 peculiarity
- Ultra-low differential pressure
- Stable with selected ceramic capacitors
- Low ground pin current
- 0.06% load regulation
- 10nA quiescent current in shutdown mode
- The guaranteed output current is 1.5A DC
- Available in TO-263, TO-220, and SOT-223 packages
- Output Voltage Accuracy± 1.5%
- ^Error flag indicates output status
- Sensing options improve load regulation
- Overheat/overcurrent protection
- Junction temperature range from -40°C to +125°C
illustrate
The LP3852/LP3855 series of fast ultra-low dropout linear regulators operate from +2.5 V to +7.0 V input supplies. A wide range of preset output voltage options are available. These ultra-low dropout linear regulators respond very quickly to one-step loads, which makes them suitable for use in variations in low-voltage microprocessor applications. The LP3852/LP3855 have been developed using a CMOS process that allows low quiescent current operation with independent output load current. This CMOS process also allows the LP3852/LP3855 to operate at very low differential pressure conditions.
Differential pressure: Ultra-low dropout, typically at 150mA load current and 240mV at 1.5mV at 1.5mV.
Ground Pin Current: Typically 4 mA at 1.5A load current.
Shutdown mode: Typically 10nA quiescent current when the shutdown pin is pulled down.
^Error flags: ^The error flag becomes low when the output voltage drops below 10% of the nominal value.
Read out: Needle feeling, improved load adjustment in the remote area.
Precision Output Voltage: A wide range of output voltage options are available from 1.8V to 5.0V, a condition that guarantees accuracy of ± 1.5% ± 3.0% at room temperature (different lines, loads, and temperatures).
apply
- Microprocessor power supply
- BTL, GTL, GTL+ and SSTL bus terminals
- DSP power supply
- SCSI terminated
- Postal Regulatory Authority
- High-efficiency linear regulator
- Battery charger
- Other battery-powered applications
|