LP38842SX-1.5

• Product introduction

 peculiarity

• Ideal for converting from 1.8V or 1.5V inputs
• Designed for the use of low ESR ceramic capacitors
• 0.8V, 1.2V and 1.5V standard voltages
• Ultra-low dropout voltage (115mV@1.5A typical)
• 1.5% initial output accuracy
• Load Regulation 0.1%/(typical)
• 30nA (typical) quiescent current during shutdown
• Current at the low ground pin under all load conditions
• Overtemperature/overcurrent protection
• Available in 5-lead TO220 and TO263 packages
• -40°C to +125°C junction temperature range

illustrate

The LP38842 is a high current, fast response regulator that maintains output voltage regulation with minimal input and output voltage drop. Manufactured on a CMOS process, the device consists of two input voltages: VBIAS provides the voltage to drive the gate of the N-MOS power transistor, and Vin is the input voltage to power the load. The use of an externally biased railway allows some to operate ultra-low Vin voltages. Unlike bipolar regulators, CMOS architectures draw very low quiescent current at any output load current. The result of using an N-MOS power transistor with a wide bandwidth but minimal external capacitance is the need to maintain loop stability.

The fast transient response of these devices makes them suitable for DSP, microcontroller core voltage, and switch-mode power supply postregulators. The device is available in TO-220 and TO-263 packages.

Differential pressure: 115 millivolts (typical) @ 1.5A load current.

Quiescent current: 30 mA (typical) at full load.

Shutdown current: When the S/D# pin of 30 NA (typical) is low.

Precision output voltage: 1.5% room temperature accuracy.

apply

• Power supply for ASICs: - Desktop computers, laptops and graphics cards, servers - Game set-top boxes, printers and copiers
• Server core and I/O power
• Power supplies for DSPs and FPGAs
• Postal regulators for SMPS