LP3906SQ-JXPI

• Compatible with advanced application processors and FPGAs
• Processor functions and I/O inside the 2 LDO power supplies
• Independent control of the functions and settings of high-speed serial interface devices
• Precision internal reference
• Thermal overload protection
• Current overload protection
• 24-pin 5 × 4 × 0.8mm LLP package
• Software programmable voltage regulator

illustrate

The LP3906 is a versatile, programmable power management unit, low-power FPGA, microprocessor, and DSP optimized. The device integrates dynamic voltage management (DVM) for two high-efficiency 1.5A step-down DC/DC converters, two 300mA linear regulators, and a 400kHz I 2 The C-compatible interface allows a host controller to access the LP3906 of the internal control registers. The LP3906 also features programmable power-on sequencing and is a tiny 5 x 4 x 0.8 mm LLP - 24-pin package.

Main specifications Step-down DC/DC converters (buck）

• 1.5A output current
• Programmable output voltage from:
• Buck1：0.8V - 2.0V
• Buck2：1.0V - 3.5V
• Up to 96% efficiency
• PWM switching frequency of 2 MHz
• ± 3% output voltage accuracy
• Automatic soft start

• Programmable V_OUTis 1.0V - 3.5V
• ± 3% output voltage accuracy
• 300 mA output current
• 25 mV difference typical

apply

• FPGA, DSP core power
• Application processor
• Peripheral I/O power supply