LP3907SQ-JYQX

• Compatible with advanced application processors and FPGAs
• Processor functions and I/O inside the 2 LDO power supplies
• Independent control of the functions and settings of high-speed serial interface devices
• Precision internal reference
• Thermal overload protection
• Current overload protection
• 24-pin 40.8 mm law firm or 25 bump balls × 4 × 2.5 × 2.5 mm micro SMD packages
• Software-programmable voltage regulator
• Buck1 and Buck2 (i.e., external power-on reset function with good power and delay function)
• Undervoltage lockout from the detector to the monitor input voltage
• LP3907Q is an automotive-grade product with AECQ-100 Class 1 qualified

illustrate

The LP3907 is a multifunctional, programmable power management unit with low-power FPGAs, microprocessors, and DSP optimizations. The device integrates dynamic voltage management (DVM) for two high-efficiency 1A/600mA step-down DC/DC converters, two 300mA linear regulators, and a 400kHz I 2 The C-compatible interface allows a master controller to access the LP3907 of the internal control registers. In addition, the LP3907 features programmable on-power sequencing. Package options include a tiny 4× 4 ×0.8 mm LLC 24-pin package and a smaller 2.5 × 2.5 mm micro SMD 25 bump package.

Main Specifications Step-Down DC/DC Converter (Step-Down)

• 1A/600mA output current
• Programmable V OUT from:
• Buck1：0.8V - 2.0V @ 1A
• Buck2: 1.0V - 3.5V @600毫安
• Efficiency up to 96%
• 2.1MHz PWM switching frequency
• PWM - Automatic mode change at low load with PFM
• ± 3% output voltage accuracy
• Automatic soft start

• Programmable V OUT is 1.0V - 3.5V

• (Except for "JJ11" and "FX6W" options)
• ± 3% output voltage accuracy
• 300mA output current
• It is a low dropout of 30mV (typical).

apply

• FPGA, DSP core power
• Application processor
• Peripheral I/O power supply