LP3907TL-SMP1

• Compatible with advanced application processors and FPGAs
• Processor functions and I/O inside the 2 LDO power supplies
• Independent control of the functions and settings of high-speed serial interface devices
• Precision internal reference
• Thermal overload protection
• Current overload protection
• 24-pin 40.8mm law firm or 25 solder balls × 4 × 2.5 ×2.5mm micro SMD package
• Software programmable voltage regulator
• Buck1 and Buck2 (i.e., external power-on reset function with good power supply and delay function)
• Undervoltage lockout of detector-to-monitor input voltage
• LP3907Q is automotive grade, AECQ-100 Class 1 qualified

illustrate

The LP3907 is a versatile, programmable power management unit, low-power FPGA, microprocessor, and DSP optimized. The device integrates dynamic voltage management (DVM) for two high-efficiency 1A/600mA step-down DC/DC converters, two 300mA linear regulators, and a 400kHz I 2 The C-compatible interface allows a master controller to access the LP3907 with internal control registers. In addition, the LP3907 features programmable power supply sequencing. Package options include a tiny 4× 4×0.8mm law firm 24-pin package and a smaller 2.5×2.5mm micro SMD 25 solder ball package.

Main specifications Step-down DC/DC converters (buck）

• 1A/600mA output current
• Programmable V_OUTFrom:
• Buck1：0.8V - 2.0V @ 1A
• Buck2: 1.0V - 3.5V @600毫安
• Up to 96% efficiency
• 2.1MHz PWM switching frequency
• PWM - PFM automatically changes mode at low load
• ± 3% output voltage accuracy
• Automatic soft start

• Programmable V_OUTis 1.0V - 3.5V

• (except "JJ11" and "FX6W" options)
• ± 3% output voltage accuracy
• 300mA output current
• is a 30mV (typical) low dropout voltage

apply

• FPGA, DSP core power
• Application processor
• Peripheral I/O power supply