peculiarity
(For V+= 5V and V-= 0V, typical, unless otherwise noted)
| 2.7V and 5V performance guaranteed |
| No crossover distortion |
|
| Space-saving package |
5-pin SC70 2.0x2.1x1.0mm |
| Industrial temperature range |
-40°C to +85°C |
| Gain-bandwidth product |
152 kHz |
| Low supply current LPV321 |
9μA |
| LPV358 |
15μA |
| LPV324 |
28μA |
Rail-to-rail output swing @ 100 K  load
|
V+-3.5 mV |
| |
V-+90 mV |
| VCM |
- 0.2V to V+- 0.8V |
illustrate
The LPV321/358/324 are low-power (9% μA at 5.0V channel μA) versions of the LMV321/358/324 op amps. This is another commodity op amp LMV321/358/324 home addition.
The LPV321/358/324 are the most cost-effective solution for applications where low voltage, low power operation, space saving and low price are required. The LPV321/358/324 rail-to-rail output swing capability and input common-mode voltage range includes ground. They all exhibit excellent speed-to-power ratio, achieving a bandwidth of 5 kHz with only 9μA being supplied.
The LPV321 is available in the rescue 5-pin SC70, which is about half the size of the 5-pin SOT23 package. The small package saves PC board space and enables the design of small portable electronic devices. It also allows designers to place devices close to the signal source to reduce noise interference and improve signal integrity.
The chip is built with the state's advanced submicron silicon gate BiCMOS process. The LPV321/358/324 are designed to improve noise performance and high output current to drive bipolar input and output stages.
apply
- Active filters
- Universal low voltage applications
- Universal portable device
|