home page>Product Center> Operational amplifiers
LPV531MKX
Product images are for illustrative purposes only
Product details are welcome upon request

LPV531MKX

  • Category:Operational amplifiers
  • Product Name:Programmable microCMOS input, rail-to-rail output op amp
  • Manufacturers:NXP
  • Production Batch Number:10+
  • Encapsulation:TSOT-23-6
  • Stock Status:There is stock
  • Stock Quantity:20000
  • Minimum order quantity: 1
  • Details:Click here to find pdf information on the LPV531MKX
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

 peculiarity

(A typical 5V power supply, unless otherwise noted.) )

Supply voltage

2.7V to 5.5V

Dynamic power mode settings

 
  • Continuously programmable supply current

    range

    5μA,425μA

  • Continuously programmable bandwidth

    range

    73 kHz to 4.6 MHz

Input common-mode voltage range

- 0.3V to 3.8V

Common-Mode Rejection Ratio (CMRR)

95 dB

Rail-to-rail output voltage swing

 

Input offset voltage

1 mV

 

illustrate

The LPV531 is a very flexible operational amplifier. A single external resistor enables the system designer to define the quiescent current, gain-bandwidth product, and output short-circuit current capability. This innovative feature enables system designers to dynamically switch power stages to optimize op amp performance and meet system design requirements.

The LPV531 can be customized for a variety of applications. It provides the system designer with a dynamic trade-off of the supply current to bandwidth, by adjusting the current derived from me target SEL The terminals use DACs or are at different resistance values and with I series SEL Terminal switching ability. The LPV531 is capable of operating from 73 kHz in a time of only 5 μA and up to 4.6 MHz in a fast manner and consuming only 425 μA. The input offset voltage is relatively independent, so the effect of the chosen power level is not significant.

Using the CMOS input stage, the LPV531 reaches 50 FA and a common-mode input voltage extends from the negative supply rail with a positive supply input bias current of 1.2V. The LPV531 railway, to the rail Class AB output stage, enables this op amp to provide maximum dynamic range at low supply voltages.

Available in a 6-pin TSOT23 package, the LPV531 is ideal for use in handheld electronics and portable applications. LPV531 is manufactured using the national advanced VIP50 process.

A fixed supply current/gain bandwidth is available upon request.

 


apply

  • AC coupling circuit
  • Portable instrument
  • Active filters

andLPV531MKXRelated ICs are:


Model Manufacturers lot number encapsulation illustrate
LM48824TM NXP 10+ SMD Class G headphone amplifier
DS92LV3241TVS NXP 10+ 64-TQFP 20-85 MHz 32-bit channel connection serial
DS92LV3241TVSX NXP 10+ LLP 20-85 MHz 32-bit channel connection serial
DS92LV3242TVS NXP 11+ QFP64 20-85 MHz 32-bit channels connect to the II deserializer
DS92LV3221TVS NXP 11+ QFP64 20-50 MHz 32-bit channel connection serial
LPV531MK NXP 10+ TSOT-6 Programmable microCMOS input, rail-to-rail output op amp
LMV796MFX NXP 11+ SOT23-5 17 MHz, low noise, CMOS input, 1.8V op amp
LMV797MMX NXP 10+ MSOP-8 17 MHz, low noise, CMOS input, 1.8V op amp
LMV791MK NXP 10+ SOT23-6 17 MHz, low noise, CMOS input, 1.8V off op amp
LMV792MMX NXP 10+ SOP 88 MHz, low noise, 1.8V CMOS input, compensatory op amp

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

NXP brand product recommendation


Model Manufacturers lot number encapsulation illustrate
LPV531MK NXP 10+ TSOT-6 Programmable microCMOS input, rail-to-rail output op amp
LMV796MFX NXP 11+ SOT23-5 17 MHz, low noise, CMOS input, 1.8V op amp
LMV797MMX NXP 10+ MSOP-8 17 MHz, low noise, CMOS input, 1.8V op amp
LMV791MK NXP 10+ SOT23-6 17 MHz, low noise, CMOS input, 1.8V off op amp
LMV792MMX NXP 10+ SOP 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV792MM NXP 10+ SOP 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MFX NXP 10+ SOT23-5 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV793MAX NXP 10+ SOP 88 MHz, low noise, 1.8V CMOS input, compensated for the PowerWise ® series of operational amplifiers
LMV793MA NXP 10+ SOP8 88 MHz, low noise, 1.8V CMOS input, compensated for the operational amplification of the PowerWise ® series
LMV793MF NXP 11+ SOT-23-5 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV794MMX NXP 10+ MSOP-8 88 MHz, low noise, 1.8V CMOS input, compensatory op amp
LMV861MGX NXP 08+ SC70-5 Single 30 MHz low-power CMOS, hardened operational amplifier
LMV861MGE NXP 10+ SC70-5 Single 30 MHz low-power CMOS, hardened operational amplifier
LMV861MG NXP 11+ SC70-5 Single 30 MHz low-power CMOS, hardened operational amplifier
LMV862MM NXP 10+ MSOP-8 Dual 30 MHz low-power CMOS, hardened operational amplifiers
DAC081C081CISDX NXP 10+ LLP 8-bit micropower digital-to-analog converter
DAC081C081CISD NXP 09+ LLP 8-bit micropower digital-to-analog converter
DAC081C081CIMK NXP 11+ SOT23-6 10-bit micropower digital-to-analog converter
DAC081C085CIMMX NXP 10+ MSOP8 10-bit micropower digital-to-analog converter
DAC081C085CIMM NXP 10+ MSOP8 10-bit micropower digital-to-analog converter

Categorical search