LT1018CS8

• Product Introduction

LT1018CS8 micropower dual-channel comparator brand new original is produced by LINEAR original factory, in 8/SO package, batch number 200441, microchip century-old integrated circuit warehouse is currently in stock

peculiarity

• 最大偏移电压：1mV
• 最大偏置电流：15nA
• 典型输出驱动电流：70mA
• 工作电源电压范围：1.1V 至 40V
• 内部上拉电流
• 输出能够驱动高于 V+ 的负载
• 30μA 电源电流 (LT1017)、110μA 电源电流 (LT1018)
• 采用 8 引脚 PDIP、8 引脚塑料 SO 和 16 引脚塑料 SO 封装

description

®The LT 1017/LT1018 are general-purpose micropower comparators. The LT1017 is optimized for extremely low operating power consumption, while the LT1018 operates at higher power and higher speeds. Both devices can operate from a single 1.1V battery to a voltage range of up to 40V. The output stage includes a Class "B" pull-up current source, which eliminates the need for an external resistive pull-up element and saves power. The output stage is also designed to drive a load that allows it to be connected to a power supply that is corrected to the device's V+, as comparators with open-collector output stages can do. The input specs are also excellent. On-chip trimming minimizes offset voltages, while high gain and common-mode rejection ratios keep other input-related errors very low. The common-mode voltage range includes ground potential. Special circuitry prevents incorrect output states, even if the input is overdriven. The LT1017/LT1018 pins are compatible with older dual-channel comparators such as the Model 393 device.