• Product Introduction

LT1215CS8

23MHz, 50V/μs, single-supply dual and QuadPrecision operational amplifiers

peculiarity

• Slew rate: 50V/μs typical
• Gain bandwidth product: 23MHz typical
• Fast creation to 0.01%
  2V step 200μV: 250ns typical
  The 10V step is typical for 1mV:480ns
• All in package superior DC accuracy
  Input offset voltage: 450μV max
  Input offset voltage drift: 10μV/°C,
• Single-power operation
  The input voltage range includes ground potential
  The output swing is grounded while absorbing current
• Low input noise voltage: 12.5 nV/rtHz typical
• Low input noise current: 0.5pA/rtHz typical
• Specified 3.3V, 5V, and ± 15V
• Large output drive current: 30mA min
• Low supply current per amplifier: 6.6 mA max
• Dual 8-pin DIP and SO-8
• Four in 14-pin DIP and narrow SO-16

description

H (metal cans), J (ceramic) and K (metal cans) The software packages for Linear are obsolete

Download the detailed and complete data sheet

® The LT 1215 is a dual, single-supply precision op-amp with a gain bandwidth product of 23MHz and a slew rate of 50V/μs. The LT1216 is a quadruple version of the same amplifier. The DC accuracy of the LT1215/LT1216 eliminates trimming in most systems while providing high-frequency performance that would not normally be found in a single-supply amplifier.

The LT1215/LT1216 will operate on any total supply greater than 2.5V and less than 36V. These amplifiers are available from a single 3.3V supply, a single 5V and ± 15V supply, specified, requiring only 5 milliamps of quiescent supply current per amplifier. There is no output of the damage or reversal stage, and the input can go beyond the supply drive. The minimum output driver is 30mA, making it ideal for driving low-impedance loads.