LT1353
Dual and quad 250μA, 3MHz, 200V/μs op-amps
Features3MHz Gain Bandwidth200V/μs Voltage Slew RateCurrent per amplifier250μASupply ™ Op AmplifierC-load Drive All Capacitive LoadsUnity Gain StabilizationMaximum Input Offset Voltage: 600μVMaximum input bias current is 50nAMaximum input offset current: 15nALowest DC gain, RL=2K: 30V/mVInput noise voltage: 14nV/ RT Hz to 0.1%, Stabilization Time, 10V Steps: 700ns to 0.01%, Stability Time, 10V Steps: 1.25μs into 1k Minimum Output Swing : ± 13V Minimum Output Swing of 500 ohms Output Swing : ±3.4V Specified at ± 2.5V, ±5V and ±15V are available in SO-8 packages LT1353 in fine surface mount packages
Description LT™1352/LT1353 dual and quad, low-power, high-speed operational amplifiers with excellent AC and DC performance. The amplifier has a much lower supply current and a device with a bandwidth comparable to the slew rate. The circuitry is combined with the current feedback performance of a true op-amp with a true high impedance input. High conversion rate ensures that the large signal bandwidth is not degraded. Each output is capable of driving a 1K ohm load to 13V, a ± 5V supply± a 15V supply, and a 500W load to 3.4V. The LT1352/LT1353 are fast, high-performance amplifiers that use this unique topology and adopt Lingte's advanced complementary bipolar processing family members. For higher bandwidth devices, the higher supply current passes through the LT1354 LT1365 datasheet. The bandwidth of 12MHz is 25MHz, 1MA, 2 mA for 50MHz and 70MHz, and the supply current is 4mA and 6 mA per amplifier. Singles, even, and quadrilaterals for each amp. The LT1352 is available in an 8-pin SO package. The LT1353 is available in a 14-pin narrow-body surface-mount package
apply
Battery-Powered Systems
Wideband Amplifiers
Buffers
Active Filters
Data Acquisition Systems
Photodiode Amplifiers