LT1354IS8
12MHz op amp, 400V/μs
peculiarity
- 12MHz gain bandwidth
- 400V/μs slew rate
- 1.25 mA maximum supply current
- Unity gain is stable
- All capacitive loads of a Type C load ™ op amp driver
- 10nV/rt Hz input noise voltage
- Maximum input offset voltage of 800μV
- 300nA maximum input bias current
- 70nA maximum input offset current
- 12V/mV minimum dc gain,RL = 1K
- The settling time of 230ns is 0.1% in 10V steps
- 280ns to 0.01% with settling time in 10V steps
- ± 12.5V output swing min
- ± 2.5V minimum output swing of 150 ohms
- Specify at ± 2.5V, ± 5V, and ± 15V
description
® The LT 1354 is a low power, high speed high slew rate operational amplifier with excellent AC and DC performance. The LT1354 has much lower supply current, low input offset voltage, low input bias current, and higher dc gain than devices with the same bandwidth. The circuit topology is a voltage feedback amplifier with the rotation characteristics of a current feedback amplifier. The amplifier is a single gain stage with excellent stability characteristics, which makes it ideal for circuit data acquisition systems. Output driver with a 500 ohm load± 15V supply and a 150 ohm load at ± 5V supply± 2.5V to ± 12V. This amplifier is also stable for any capacitive load, which makes it in buffer or cable driver applications.
The LT1354 is a family of high performance amplifiers that are fast using this unique topology and feature Sprinter advanced bipolar complementary processing. LT1354 for dual and quad amplifier versions, see LT1355/LT1356 datasheet. For higher bandwidth devices, higher supply current is seen on the LT1357 as seen in the LT1365 datasheet. Available single, dual, quad per amplifier.