• Product introduction

LT1360CS8

800V/μs op amp at 50MHz

peculiarity

• 50MHz gain bandwidth
• 800V/μs slew rate
• 5 mA maximum supply current
• 9nV/rt Hz input noise voltage
• Unity gain is stable
• C - Capacitive load of all drivers of the LoadTM op amp
• Maximum input offset voltage of 1mV
• 1μA maximum input bias current
• 250nA maximum input offset current
• ± 13V minimum output swing of 500 ohms
• ± 3.2V has a minimum output swing of 150 ohms
• 4.5V/mV minimum dc gain_，RL = 1K
• 60ns settling time is 0.1% in 10V steps
• 0.2% differential gain,_OneV =_2，RL = 150Ohms
• 0.3 ° differential phase,_OneV =_2，RL = 150Ohms
• Specify at ± 2.5V, ± 5V, and ± 15V

description

LT^®The 1360 is a high speed, very high slew rate operational amplifier with excellent DC performance. The LT1360 features reduced supply current, low input offset voltage, low input bias current and higher dc gain ratio for devices of the same bandwidth. The circuit topology is a voltage feedback amplifier with the rotation characteristics of a current feedback amplifier. The amplifier is a single gain stage with excellent stability characteristics, which makes it ideal for circuit data acquisition systems. The output drives a 500 ohm load, ± 13V, ± a 15V supply and a 150 ohm load at a ± 5V supply± 3.2V. The amplifier can also drive any capacitive load, which makes it useful in buffer or cable driver applications. The LT1360 is a family of fast high performance amplifiers using this unique topology and advanced bipolar complementary processing from Sprinter Corporation. For dual and quad amplifier versions of the LT1360, see the LT1361/LT1362 datasheet. For a 70MHz amplifier, the supply current per amplifier is shown in the LT1363 and LT1364/LT1365 datasheets of 6 mA. With 12MHz and 25MHz bandwidths, lower supply current amplifiers LT1354 LT1359 datasheets pass. Singles, evens and quads per amp.