• Product Introduction

LT1363CS8

At 70MHz, 1000V/μs operational amplifier

peculiarity

• 70MHz gain bandwidth
• 1000V/μs slew rate
• 7.5 mA maximum supply current
• 9nV/√Hz input noise voltage
• Unit gain is stable
• C-loadTM op-amp driver all capacitive loads
• 1.5mV maximum input offset voltage
• 2μA maximum input bias current
• 350nA maximum input offset current
• 50 mA minimum output current
• ± 7.5V minimum output swing of 150 ohms
• 4.5V/mV minimum DC gain, R L = 1K
• 50ns settling time of 0.1% in 10V steps
• 0.06% differential gain, A V = 2, R L = 150 ohms
• 0.04° differential phase, A V = 2, R L = 150 ohms
• Specified in ± 2.5V, ± 5V, and ± 15V

description

The LT1363 is a high-speed, very high slew rate and superior DC performance operational amplifier. The LT1363 features reduced supply current, low input offset voltage, low input bias current, and high DC gain ratio for devices with the same bandwidth. The circuit topology is a voltage feedback amplifier with the slewing characteristics of a current feedback amplifier. The amplifier is a single gain stage with excellent stability characteristics, which makes it ideal for circuit data acquisition systems. The output drives a 150 ohm load of ± 7.5V, ± 15V supply, ± 3.4V ± 5V supply. The amplifier can also drive any capacitive load, which makes it suitable for buffer or cable driver applications. The LT1363 is a fast, high-performance amplifier family member that uses this unique topology and features advanced bipolar complementary processing from Lingte. The dual and quad amplifier versions of the LT1363 see the LT1364/1365 datasheet. For 50MHz per amplifier supply current, see LT1360 and LT1361/1362 datasheets 4 mA amplifiers. With 12MHz and 25MHz bandwidths, the lower supply current amplifier LT1354 LT1359 data sheet passes. Available in single, dual, quadrilaterals for each amp.