• Product Introduction

LT1365CS

Dual and quad up to 70MHz, 1000V/μs operational amplifier

peculiarity

• 70MHz gain bandwidth
• 1000V/μs slew rate
• 7.5 mA max
• Unit gain is stable
• All capacitive loads of the C-load ™ op-amp driver
• 9nV/√Hz input noise voltage
• 1.5mV maximum input offset voltage
• 2μA maximum input bias current
• 350nA maximum input offset current
• 50 mA minimum output current
• ± 7.5V minimum output swing of 150 ohms
• 4.5V/mV minimum DC gain, R L = 1K
• 50ns settling time of 0.1% in 10V steps
• 0.06% differential gain, A V = 2, R L = 150 ohms
• 0.04° differential phase, A V = 2, R L = 150 ohms
• Specified in ± 2.5V, ± 5V, and ± 15V

description

The LT1364/LT1365 are high-speed dual-core and quad op-amps with excellent AC and DC performance. The amplifier has a much lower supply current and a higher slew rate than devices with the same bandwidth. The topology of a circuit is a voltage feedback amplifier matched with the slewing performance of a high-impedance input and current feedback amplifier. The high voltage slew rate and single-stage design provide excellent settling performance, making it ideal for circuit data acquisition systems. Each output drives a 150 ohm load with a ± 7.5V supply, ± a 15V supply, and a ± 3.4V ± 5V supply. The amplifier is stable for any capacitive load, making them useful in buffer or cable drive applications. The LT1364/LT1365 is a fast, high-performance amplifier family member that uses this unique topology and features advanced bipolar complementary machining from Lingte. LT1363 datasheet for LT1364/LT1365 versions of a single amplifier. For 50MHz devices with 4 mA supply current through the LT1360 LT1362 data sheet. For lower supply current amplifiers, see the LT1354 LT1359 datasheet. Available in single, dual, quadrilaterals for each amp.