LT1366

• Product Introduction

LT1366 dual-channel, accurate, rail-to-track input; And; output op amp

peculiarity

• The input common-mode range includes two power rails The input common-mode range includes two power rails
• Rail-to-rail output swing Rail-to-rail output swing
• Low input offset voltage: 150μV Low input offset voltage: 150μV
• High common-mode rejection ratio: 90dB High common-mode rejection ratio: 90dB
• High A VOL: >1V/μV (drives 10k loads) High and VOL: 1V/μV (drives 10K loads)
• Low Input Bias Current: 10nA Low Input Bias Current: 10nA
• Wide Supply Range: 1.8V to ±15V Wide Supply Range: 1.8V to ±15V
• Low Supply Current: 375μA per amplifier Low Supply Current: 375μA per amplifier
• High Output Drive: 30mA High Output Drive Current: 30mA
• 400kHz Gain Bandwidth Product The product of the gain bandwidth of 400kHz
• Slew rate: 0.13V/μs Slew rate: 0.13V/μs
• Stable at capacitive loads up to 1000pF and stable at capacitive loads up to 1000pF

description

® LT®1366/LT1367/LT1368/LT1369 for LT 1366/LT1367/LT1369 It maintains its characteristics over the 1.8V to 36V supply range. Operating specifications are developed for 3V, 5V, and ±15V power supplies. The input offset voltage is typically 150μV and provides an open-loop gain AVOL with a value of 1,000,000 when driving a 10k load. Common-mode rejection is typical for 90dB over the entire rail-to-rail input range, while supply rejection is 110dB. It maintains its characteristics over the 1.8V to 36V supply range. Its operating specifications are formulated for 3V, 5V and ± 15V power supplies. input; The offset voltage difference is typically 150μV and provides an open-loop gain AVOL with a value of one million when driving a 10K load. the suppression of common mode is the whole orbit to the orbital input; The typical value in the range is 90dB, while the power supply rejection is 110 dB.

The LT1366/LT1367 feature traditional compensation function circuitry to ensure stability at capacitive loads ≤1000pF. The LT1368/LT1369 uses a 0.1μF compensated circuitry The LT1366/LT1367 uses a conventional compensated circuitry to ensure stability at capacitive loads ≤ 1000pF. The LT1368/LT1369 engineering department uses a compensating function circuit that requires a 0.1μF A/D converter is advantageous. What is advantageous when A/D converters

The LT1366/LT1368 are available in a plastic 8-pin PDIP package and an 8-pin SO package in a standard dual-channel op-amp pin configuration. LT1367/LT1369 available in a standard four-channel op amp pin configuration with 14-pin plastic SO The LT1366/LT1368 are available in a plastic 8-pin PDIP package and an 8-pin SO package in a standard two-channel op amp pin configuration. The LT1367/LT1369 are available in a standard four-channel op amp pin configuration and are available with 14-pin plastic SO

apply

• Rail-to-Rail Buffer Amplifier Rail-to-Rail Buffer Amplifier
• Low-voltage signal processingLow-voltage signal processing
• Supply current detection on any power rail Power supply current detection on any power rail
• Drive A/D converter Drive A/D converter to drive the A/D converter