LT1462

• Product Introduction

LT1462 dual/quad, micro, 260μW-load Picoampere bias current JFET input op amp

peculiarity

• Input Bias Current:
  2pA Max (LT1462A LT1462A)
  20pA Max (LT1462, LT1463) Max at 20Pa (LT1462, LT1463)
• Supply Current per Amplifier: 45μA Max Supply Current per Amplifier: 45μA max
• Unity-Gain Stable for C-Load™Up to 10nF ™
• Input common mode range includes positive rail
• Guaranteed Specs with ±5V, ±15V Supplies ± 5V, ± 15V power supply
• Gain Bandwidth Product: 175kHz Typ
• Slew Rate: 0.13V/μs Typ: 0.13V/μs Typical
• Guaranteed Matching Specifications
• Standard Pinout: SO-8, SO-14 Package
• 描述 The LT®1462 (dual) and LT1463 (quad) are the first micropower op amps (45µA max per amp) to offer picoampere input bias currents (1pA typ) and unity gain stability for capacitive loads up to 10nF. ®The LT 1462 (dual) and LT1463 (four) are the first micropower operational amplifiers (up to 45μA per amp) to provide picoampere input bias current (1pA typical) and unity capacitive load gain stabilized to 10nF. The output can swing a 10k load to within 1.5V of either supply, just like op amps that require an order of magnitude more supply current. This unique combination of performance makes the LT1462/LT1463 ideal over a wide range of input and output impedances. In the design and testing of the LT1462/LT1463, particular emphasis has been placed on optimizing performance in the low cost SO-8 (dual) and 14-lead SO package (quad) for ±15V and ±5V supplies. The LT1462/LT1463 are designed and tested in low-cost, performance-optimized SO-8 (dual) and 14-pin SO packages (quad) for ± 15V and ±5V power supplies. The input common mode range includes the positive rail. Slew rate (0.08V/μs min) and gain bandwidth product (125kHz min) are 100% tested. A full set of matching specifications is also provided
• apply Battery-Powered Systems Photocurrent Amplifiers Low Frequency, Micropower Active Filters Low Droop Track-and-Hold Circuits