LT1573

• Product Introduction

LT1573 Low Dropout Regulator Driver

peculiarity

• Low Cost Solution for High Current, Low Dropout Regulators
• Fast Transient Response Needs Much Less Bulk Capacitance
• Latching Overload Protection Minimizes Heat Sink Size to minimize heatsink size
• Precision Output Voltage (1%)
• Single Supply Operation: V IN = 2.8V to 10V Single Supply Operation: VIN = 2.8V to 10V
• Small Surface Mount Package
• Capable of Very Low Dropout Voltage (能力非常低的压差电压（
• Fixed or Adjustable Outputs
• Shutdown
• 描述 The LT®1573 is a regulator driver IC designed to provide a low cost solution for applications requiring high current, low dropout and fast transient response. ®The LT 1573 is a regulator driver IC designed to provide a low-cost solution for applications that require high current, low dropout, and fast transient response. When combined with an external PNP power transistor, this device provides load current up to 5A with dropout voltages as low as 0.35V. The LT1573 circuitry is designed for extremely fast transient response. The LT1573 circuit is designed for extremely fast transient response. This greatly reduces bulk storage capacitance when the regulator is used in applications with fast, high current load transients. To keep cost and complexity low, the LT1573 uses a new time-delayed latching overcurrent protection technique that requires no external current sense To keep cost and complexity low, the LT1573 uses a new time-delay latching overcurrent protection technology that eliminates the need for an external current-sense resistor. Base drive is limited for instantaneous protection, and a time-delayed latch protects the regulator from continuous short circuits. The LT1573 is available as an adjustable regulator with an output range of 1.27V to 6.8V and with fixed output voltages of 2.5V, 2.8V and 3.3V. The LT1573 is available as a fixed output voltage regulated for 6.8V, 2.5V, 2.8V, and 3.3V with an output range of 1.27V. Output accuracy is better than 1% to meet the critical regulation requirement of fast microprocessors. A special 8-pin, fused-lead surface mount package is used to minimize regulator footprint and provide adequate heat sinking.
   
• 应用
  • 3.3V to 2.5V Regulator 3.3V to 2.5V Regulator
  • Microprocessor Power Source
  • Post Regulator for Switching Supplies
  • High Efficiency Linear Regulators
  • Ultralow Dropout Regulators
  • Low Voltage Linear Regulators