LT6200CS8

peculiarity

• 低噪声电压：0.95nV/√Hz (100kHz)
• 增益带宽乘积：
       LT6200 / LT6201    165MHz     A_V = 1
       LT6200-5                  800MHz    A_V ≥ 5
       LT6200-10                1.6GHz      A_V ≥ 10
• 低失真：-80dB (在 1MHz，R_L = 100Ω)
• 两个 LT6201 在纤巧的 DFN 封装
• 输入共模范围包括两个电源轨
• 轨至轨输出摆幅
• 低失调电压：1mV (最大值)
• 宽电源范围：2.5V 至 12.6V
• 输出电流：60mA (最小值)
• SO-8 和扁平 (1mm) ThinSOT^TM封装
• 工作温度范围：-40ºC 至 85ºC
• 电源关断、热停机功能

description

®The LT 6200 / LT6201 are single- and dual-channel ultra-low-noise, rail-to-rail input and output, unity-gain-stabilized operational amplifiers with a noise voltage of 0.95nV/√Hz. These amplifiers combine very low noise, 165MHz gain bandwidth, and 50V/μs slew rate and are optimized for low-voltage signal conditioning systems. A stop pin is responsible for reducing the supply current under standby conditions, while a thermal stop circuit is used to protect the device from damage caused by overload conditions. The LT6200-5 / LT6200-10 are single-channel amplifiers optimized for higher gain applications, achieving high gain bandwidth and slew rates. The LT6200 series maintains its performance from 2.5V to 12.6V supplies and is specificationd for 3V, 5V, and ±5V supplies. For a compact board layout, the LT6200 / LT6200-5 / LT6200-10 are available in 6-pin ThinSOTTM and 8-pin SO packages. The dual-channel LT6201 is available in an 8-pin SO package with a standard pin configuration and a compact, double-pin fine-pitch leadless package (DFN). These amplifiers can be used as a direct replacement for many high-speed op amps to improve input/output range and noise performance.