LT6234

• Product introduction

LT623460MHz, rail-to-rail output, 1.9nV/√Hz, 1.2mA op amp series

peculiarity

• Low noise voltage: 1.9nV/√Hz
• Low Supply Current: 1.2mA/Amplifier Max
• Low Offset Voltage: 350μV Max
• Gain bandwidth product:
  LT6233：60MHz； A_V≥ 1
  LT6233-10：375MHz； A_V≥ 10
• Wide supply voltage range: 3V to 12.6V
• Rail-to-rail output swing
• Common-Mode Rejection Ratio: 115dB (typical)
• Output current: 30mA
• Operating temperature range: -40°C to 85°C
• LT6233 10μA Max in Shutdown
• LT6233 / LT6233-10adoptlichen(height1mm)ThinSOT^TMencapsulation
• The dual LT6234s are integrated in an 8-lead SO package and a tiny DFN package
• The LT6235 is available in a 16-lead SSOP package

  description

  LT^®The 6233/LT6234/LT6235 are single/dual/quad low noise, rail-to-rail output, unity gain stable operational amplifiers with noise voltages of 1.9nV/√Hz, each drawing only 1.2mA of supply current. These amplifiers combine very low noise and supply current with a gain-bandwidth product of 60MHz, a slew rate of 17V/us, and are optimized for low supply voltage signal conditioning systems. The LT6233-10 is a single amplifier optimized for higher gain applications, achieving high gain bandwidth and slew rate. The LT6233 and LT6233-10 include an enable pin that can be used to reduce supply current to less than 10μA.

  The amplifier family features an output that swings within 50mV of either supply rail to maximize signal dynamic range in low supply voltage applications and is specified for 3.3V, 5V, and ±5V supplies. Each amplifier has a value of 2.1 en ̇√I_SUPPLYThe product makes it one of the best op amps with the best noise performance.

  The LT6233/LT6233-10 are available in a 6-lead SOT-23 package and the LT6234 dual amplifiers are available in an 8-lead SO package with standard pin configurations. For a compact circuit layout, the dual amplifiers are also available in a tiny dual-row fine-pitch leadless package (DFN). The LT6235 is available in a 16-lead SSOP package.

• apply

  • Ultrasound amplifiers
  • Low-noise, low-power signal processing
  • Active filters
  • Drive an A/D converter
  • Rail-to-rail buffer amplifier
•