• Product introduction

LTC1321ISW

RS232/EIA562/RS485 transceivers

peculiarity

• LTC1321: 2-EIA562/RS232 Transceivers/2-RS485 transceivers
• LTC1322: 4-EIA562/RS232 Transceivers/2-RS485 transceivers
• LTC1335: OE 4 EIA562 Transceivers/2-RS485 transceiver
• The LTC1321/LTC1322 have the same pins as SP301/SP302
• The LTC1335 features a receiver tristate output
• Low supply current: 1mA typical
• 15μA is supplied at shutdown current
• 120kBaud in EIA/TIA-562 or RS232 mode
• 10MBaud in RS485/RS422 mode
• Self-test capability in loopback mode
• Distraction-free output for Power-Up/Down
• Drive maintenance state, shutdown or power off, high impedance
• Thermal shutdown protection
• The I/O line can withstand ± 25V
• Withstands multiple ESD pulses of 10kV

description

LTC1321/LTC1322/LTC1335 low power CMOS bidirectional transceivers with two reconfigurable interface ports each. Each person can be configured as two single-ended ports, two RS485 differential ports, or one RS485 differential port and one single-ended port. The LTC1321/LTC1322 are available with RS232 or EIA562 compliant single-ended outputs, the LTC1335 with EIA562 compatible outputs, and include an output enable pin to allow the receive logic level output tri-state.

The RS232/EIA562 transceiver operates at 120kbaud and is fully EIA/TIA-562 compliant. The RS485 transceiver operates 10Mbaud and RS485 and RS422 specifications are fully compliant. All interface drivers are short-circuit protected and thermal shutdown protected. An enable pin allows the RS485 driver output to be forced into a high impedance, which is held even when the output is forced beyond the rail or powered off. Two driver outputs and receiver inputs ± 10kV ESD protection. A loopback mode connected driver outputs a receiver input for diagnostic self-test.

The LTC1321/LTC1322 can support RS232 voltage class 6.5V _DD