Product images are for illustrative purposes only
Product details are welcome upon request
LTC1427-50
-
Category:DAC digital-to-analog converter
-
Product Name:Micropower, 10-Bit Current Output DAC with SMBus Serial Interface
-
Manufacturers:LT
-
Production Batch Number:10+
-
Encapsulation:SO-8
-
Stock Status:There is stock
-
Stock Quantity:6000
- Minimum order quantity: 1
- Details:
-
LTC1427-50Micropower, 10-Bit Current Output DAC with SMBus Serial Interface
peculiarity
- Precision 50µA, ±1.5% Initial Full-Scale Output Current, ±2.5% Over Temperature
- Wide Output Voltage DC Compliance: –15V to (VCC– 1.3V)
- Wide Supply Range: 2.7V
Supply Current in Shutdown: 10µA Typ
Low Supply Current: 115µA Typ
Available in 8-Pin SO
SMBus Serial Interface
Four Selectable SMBus Addresses
DAC Powers Up at Zero or Midscale
DAC Contents Are Retained in Shutdown
The LTC®1427-50 is a micropower, 10-Bit current output DAC with an output range of 0µA to 50µA. The DAC output is guaranteed monotonic and DNL is less than 0.9LSB under all operating conditions. Full-scale accuracy is ±2.5% over the commercial temperature range. The LTC1427-50 operates with power supply voltages from 2.7V to 5.5V and the DAC current source output can be biased from (V
– 1.3V) to –15V. The LTC1427-50 communicates with external circuitry by using the SMBus serial interface. It acts as an SMBus slave device using one of four selectable SMBus addresses set by the two address pins AD0 and AD1 . On power-up, the DAC output assumes midrange or zero scale, depending on the logic state of the two address pins. The LTC1427-50 can be shut down through the SHDN pin or by setting the SHDN bit = 1 in the SMBus command byte. Digital data for the DAC output is retained internally and the supply current drops to 10µA typically when in shutdown. The LTC1427-50 is available in an 8-pin SO package.
LCD Contrast and Backlight Brightness Control
Power Supply Voltage Adjustment
Battery Charger Voltage/Current Adjustment
GaAs FET Bias Adjustment
Trimmer Pot Elimination
1840
120*85
薄膜电容器420uF 1100V PUR -15% to 0% (85 X 135mm)
TC1427COA713
MAX1427ETN-D
2SD1427
全新原装,5A/600V
D1427
1500V,5A,80W
2SB1427E
DS1427L-F5
TPS51427A
带外 (OOB) 功能已禁用的、用于笔记本电脑电源的 D-CAP+™ 模式双路同步降压控制器
CCSupply Current in Shutdown: 10µA Typ
Low Supply Current: 115µA Typ
Available in 8-Pin SO
SMBus Serial Interface
Four Selectable SMBus Addresses
DAC Powers Up at Zero or Midscale
DAC Contents Are Retained in Shutdown
The LTC®1427-50 is a micropower, 10-Bit current output DAC with an output range of 0µA to 50µA. The DAC output is guaranteed monotonic and DNL is less than 0.9LSB under all operating conditions. Full-scale accuracy is ±2.5% over the commercial temperature range. The LTC1427-50 operates with power supply voltages from 2.7V to 5.5V and the DAC current source output can be biased from (V
– 1.3V) to –15V. The LTC1427-50 communicates with external circuitry by using the SMBus serial interface. It acts as an SMBus slave device using one of four selectable SMBus addresses set by the two address pins AD0 and AD1 . On power-up, the DAC output assumes midrange or zero scale, depending on the logic state of the two address pins. The LTC1427-50 can be shut down through the SHDN pin or by setting the SHDN bit = 1 in the SMBus command byte. Digital data for the DAC output is retained internally and the supply current drops to 10µA typically when in shutdown. The LTC1427-50 is available in an 8-pin SO package.
LCD Contrast and Backlight Brightness Control
Power Supply Voltage Adjustment
Battery Charger Voltage/Current Adjustment
GaAs FET Bias Adjustment
Trimmer Pot Elimination
1840
120*85
薄膜电容器420uF 1100V PUR -15% to 0% (85 X 135mm)
TC1427COA713
MAX1427ETN-D
2SD1427
全新原装,5A/600V
D1427
1500V,5A,80W
2SB1427E
DS1427L-F5
TPS51427A
带外 (OOB) 功能已禁用的、用于笔记本电脑电源的 D-CAP+™ 模式双路同步降压控制器
- Supply Current in Shutdown: 10µA Typ
- Low Supply Current: 115µA Typ
- Available in 8-Pin SO
- SMBus Serial Interface
- Four Selectable SMBus Addresses
- DAC Powers Up at Zero or Midscale
- DAC Contents Are Retained in Shutdown
description
The LTC®1427-50 is a micropower, 10-Bit current output DAC with an output range of 0µA to 50µA. The DAC output is guaranteed monotonic and DNL is less than 0.9LSB under all operating conditions. Full-scale accuracy is ±2.5% over the commercial temperature range. The LTC1427-50 operates with power supply voltages from 2.7V to 5.5V and the DAC current source output can be biased from (VCC– 1.3V) to –15V. The LTC1427-50 communicates with external circuitry by using the SMBus serial interface. It acts as an SMBus slave device using one of four selectable SMBus addresses set by the two address pins AD0 and AD1 . On power-up, the DAC output assumes midrange or zero scale, depending on the logic state of the two address pins. The LTC1427-50 can be shut down through the SHDN pin or by setting the SHDN bit = 1 in the SMBus command byte. Digital data for the DAC output is retained internally and the supply current drops to 10µA typically when in shutdown. The LTC1427-50 is available in an 8-pin SO package.
apply
- LCD Contrast and Backlight Brightness Control
- Power Supply Voltage Adjustment
- Battery Charger Voltage/Current Adjustment
- GaAs FET Bias Adjustment
- Trimmer Pot Elimination
andLTC1427-50Related ICs are:
| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| B25620C1427K101 |
EPCOS / TDK |
18/19 |
bolt |
Capacitors for power electronics |
| B25620B1427K101 |
EPCOS / TDK |
18/19 |
bolt |
Capacitors for power electronics |
| B25620C1427A101 |
EPCOS / TDK |
18/19 |
bolt |
Capacitors for power electronics |
| B25620B1427A101 |
EPCOS / TDK |
2019+ |
bolt |
Capacitors for power electronics |
| B25620B1427A108 |
EPCOS / TDK |
1840 |
120*85 |
薄膜电容器420uF 1100V PUR -15% to 0% (85 X 135mm) |
| B25620S1427A108 |
EPCOS / TDK |
1840 |
120*85 |
薄膜电容器420uF 1100V PUR -15% to 0% (85 X 135mm) |
| LTC1427-50 |
LT |
10+ |
SO-8 |
Micropower, 10-Bit Current Output DAC with SMBus Serial Interface |
| TC1427COA713 |
MICROCHIP |
10+ |
|
COMMODITY POWER |
| TC1427COA |
MICROCHIP |
10+11+ |
SOP8 |
Hong Kong spot, imported original |
| ISL90841UIV1427Z |
INTERSIL |
10+ |
N/A |
全新原装进口，香港现货 |
| TC1427CPA |
TC |
98 |
DIP |
Brand new original in stock |
| LT142750 |
LINEAR |
04+ |
N／A |
Brand new original |
| MAX1427ETN-D |
MAXIM |
05+ |
QSOP |
Brand new original |
| 2SA1427 |
Sanyo |
04+ |
SOT-89 |
Brand new original |
| MAX1427EVKIT |
MAXIM |
05+ |
QSOP |
Brand new original |
| 2SD1427 |
TOSHIBA |
09+ |
TO-3PH |
全新原装,5A/600V |
| D1427 |
TOSHIBA |
06+ |
TO-3P |
1500V,5A,80W |
| 2SB1427E |
ROHM |
04+ |
SOT-89 |
Brand new original |
| DS1427L-F5 |
Dallas |
05+ |
CAN |
Brand new original |
| TPS51427A |
TI |
10+ |
QFN32 |
带外 (OOB) 功能已禁用的、用于笔记本电脑电源的 D-CAP+™ 模式双路同步降压控制器 |
Popular searches
| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| S34ML16G202BHI000 |
Flip Electronics |
2051+ |
63BGA |
16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded |
| FRCIR06RGG18-20S-F80-V0-M20-1.5F |
ITTVEAM |
2023+ |
connector |
Connectors, Circular Connectors, Circular Plugs & Receptacles |
| CL1215-02P72ET-U2 |
Schaltbau |
2023+ |
Contactors |
CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V |
| CL1115-02P72ET-U2 |
Schaltbau |
2023+ |
Contactors |
1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V |
| D-U204N-KLGQ |
Mors Smitt |
2023+ |
Relays |
No magnetic arc blow-out |
| D-U204N-KLCQ |
Mors Smitt |
2023+ |
Relays |
No magnetic arc blow-out |
| MIP30F00830-S1048 |
Amphenol Positronic |
2023+ |
connector |
MIP series connectors |
| C163C/110EV-R1 |
Schaltebao |
2023+ |
Contactors |
Contactors |
| F670-H4V-XUU |
LEACH |
2023+ |
Relays |
F670-H4V-XUU+SHKE470-110-AD |
| F670-H4VP-XUXU |
LEACH |
2023+ |
Relays |
F670-H4VP-XUXU+SFE670-1-1 |
| AZ16-12ZI-B1-1747-M20 |
SCHMERSAL |
2023+ |
switch |
Safety switches |
| RX2025GE1 |
Surio |
2023+ |
connector |
Extract, Remove, and Insert Tools Contact extraction tool #16 |
| 5106.021.09.24 |
Surio |
2023+ |
connector |
Extract, remove, and insert tools Extract tool with pop-up |
| ABMPSE06T28M4SV0N |
AB Connectors |
2023+ |
connector |
Plug with RFI Ground |
| ABMPSE06T36M2SV0N |
AB Connectors |
2023+ |
connector |
Plug with RFI Ground |
| ABMP18T28M13SV0N |
AB Connectors |
2023+ |
connector |
RAIL AND MILITARY LAND SYSTEMS |
| ABCIRHSE06JE1812SCNF80M32V0 |
AB Connectors |
2023+ |
connector |
Halogen Free Bayonet Lock Connector Series |
| TSW-101-06-LM-D |
samtec |
2023+ |
connector |
Classic PCB Header Strips, 0.100" pitch |
| TNL22ERT-62 |
ABB |
2016+ |
Contactors |
4P St Contactor Relay 77-143Vdc |Abb TNL22ERT-62 |
| 62EM1-00001 |
Microchip |
2023+ |
Development board |
AgileSwitch® 62mm Electrical Master SiC Gate Driver Board |
LT brand product recommendation
| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| LTC8143 |
LT |
10+ |
N-16, SW-16 |
Improved Industry Standard Serial 12-Bit Multiplying DACs |
| LTC7545A |
LT |
10+ |
N-20, SW-20 |
Improved Industry Standard Parallel 12-Bit Multiplying DAC |
| LTC7543 |
LT |
10+ |
N-16, SW-16 |
Improved Industry Standard Serial 12-Bit Multiplying DACs |
| LTC2755-12 |
lt |
10+ |
QFN-64 |
Quad current output 12-bit SoftSpan DAC with parallel I/O |
| LTC2754-12 |
LT |
10+ |
QFN-52 |
Quad 12-bit SoftSpan Iout DAC |
| LTC2753-12 |
LT |
10+ |
QFN-48 |
Dual current-output 12-bit SoftSpan DACs for parallel I/O |
| LTC2751-12 |
LT |
10+ |
QFN-38 |
Current output 12-bit SoftSpanTM DAC with parallel I/O |
| LTC2704-12 |
LT |
10+ |
SSOP-44 |
Quad 12-bit voltage-output SoftSpan DAC with readback |
| LTC2657-12 |
LT |
10+ |
QFN-20, TSSOP-20 |
LTC2657-12 - Octal I2C 12-bit rail-to-rail DAC with 10ppm/ºC maximum reference |
| LTC2654-12 |
LT |
10+ |
QFN-20, SSOP-16 |
Quad, 12-bit, rail-to-rail DAC with 10ppm/ºC maximum reference |
| LTC2642-12 |
LT |
10+ |
MS-10, DFN-10 |
12-bit Vout DAC in a 3mm × 3mm DFN package |
| LTC2641-14 |
lt |
10+ |
MS-8, DFN-8 |
LTC2641-14 - 14-bit Vout DAC in a 3mm × 3mm DFN package |
| LTC2619 |
LT |
10+ |
SSOP-16 |
LTC2619 - Quad 14-bit rail-to-rail DAC with I2C interface |
| LTC2616 |
LT |
10+ |
DFN-10 |
LTC2616 - 14-bit rail-to-rail DAC with I2C interface |
| LTC2615 |
LT |
10+ |
SSOP-16 |
LTC2615 - Octal, I2C, 16-bit rail-to-rail DAC in a 14-lead SSOP package |
| LTC2612 |
LT |
10+ |
MSOP-8 |
LTC2612 - Dual 14-bit rail-to-rail DAC in an 8-lead MSOP package |
| LTC1654 |
LT |
10+ |
SSOP-16 |
LTC1654 - Dual 14-Bit Rail-to-Rail DAC in 16-Lead SSOP Package |
| LTC1591 |
LT |
10+ |
SSOP-28, N-28 |
LTC1591 - 14-Bit and 16-Bit Parallel Low Glitch Multiplying DACs with 4-Quadrant Resistors |
| LTC1589 |
LT |
10+ |
SSOP-16 |
LTC1589 - 14-Bit SoftSpan DAC with Programmable Output Range |
| LTC2755A-16 |
LT |
11+ |
QFN-64 |
LTC2755-16 - 具并行 I/O 的四通道电流输出 16 位 SoftSpan DAC |