LTC202

peculiarity

• Micropower Operation
• Single 5V or ±15V Supply Operation
• Low Charge Injection
• Low R_ON
• Low Leakage
• Guaranteed Break Before Make
• Latch Resistant Design
• TTL/CMOS Compatible
• Improved Second Source for DG201A/DG202

  description

  The LTC™201A, LTC202, and LTC203 are micropower, quad CMOS analog switches which typically dissipate only 250µW from ±15V supplies and 40µW from a single 5V supply. The switches have 65 Ohm typical on resistance and a very high off resistance. A break-before-make characteristic, inherent in these switches, prevents the shorting of two channels. With a supply voltage of ±15V, the signal range is ±15V. These switches have special charge compensation circuitry which greatly reduces charge injection to a maximum of �25pC (±15V supplies).

  The LTC201A, LTC202, and LTC203 are designed for applications such as programmable gain amplifiers, analog multiplexers, sample-and-hold circuits, precision charge switching and remote switching. These three devices are differentiated by the type of switch action, as shown in the logic table

• apply

  • Supply Current: 1⁺=40µA, 1^-=5µA Max.
  • Charge Injection (±15V Supplies) ±25pC Max. (Single 5V Supply) 2pC Typ.
  • R_ON 65ohms Typ.
  • Signal Range: ±15V
•