home page>Product Center> DAC digital-to-analog converter

Product images are for illustrative purposes only
Product details are welcome upon request

LTC2636-10

Category:DAC digital-to-analog converter
Product Name:8-channel, 10-bit SPI Vout DAC with 10ppm/ºC reference
Manufacturers:LT
Production Batch Number:10+
Encapsulation:DFN-14, MS-16
Stock Status:There is stock
Stock Quantity:5000
Minimum order quantity: 1
Details:

Product introduction

LTC2636-108-channel, 10-bit SPI Vout DAC with 10ppm/ºC reference

peculiarity

Integrated precision benchmarking
2.5V Full Scale 10ppm/ºC (LTC2636-L)
4.096V Full Scale 10ppm/ºC (LTC2636-H)
Maximum INL Error: 2.5LSB (LTC2636-12)
Low noise: 0.75mV_P-P(0.1Hz to 200kHz)
Monotonic characteristics are guaranteed over a temperature range of -40ºC to 125ºC
Optional internal or external benchmarks
2.7V to 5.5V Supply Range (LTC2636-L)
Ultra-low crosstalk between DACs (
Low Power: 0.9mA at 3V (LTC2636-L)
Power-on reset to zero/midscale
Double-buffered data latch
Tiny 14-pin 4mm × 3mm DFN and 16-pin MSOP packages

description

LTC^®The 2636 is an 8-channel family of 12-, 10-, and 8-bit voltage output DACs featuring an integrated, high accuracy, low drift 10ppm/ºCReference in 14-pin DFN and 16-pin MSOP packages. It has a built-in rail-to-rail output buffer and is guaranteed monotonic. The LTC2636-L has a 2.5V full-scale output and operates from a single 2.7V to 5.5V supply. The LTC2636-H has a 4.096V full-scale output and operates from a single 4.5V to 5.5V supply. Each DAC can also operate with an external reference that sets the DAC full-scale output as an external reference voltage.

THESE DCs communicate through an spi/microwire-compatible 3-WIRE SERIAL INTERFACE THAT OPERATES AT CLOCK FREQUENCIES UP TO 50MHz. Devices in the MSOP package provide hardware clearance (CLR) and asynchronous DAC updates (LDAC) pin. The LTC2636 contains a power-on reset circuit. Options are provided to reset to zero scale in internal reference mode or reset to intermediate scale after power-up, or reset to midscale in external reference mode

apply

Mobile communications
Process control and industrial automation
Automatic test equipment
Portable devices
Car
Optical networks

andLTC2636-10Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
MG2636	ZTE	10+11+		Imported original
LTC2636-8	LT	10+	DFN-14, MS-16	具 10ppm/ºC 基准的 8 通道 8 位 SPI Vout DAC
LTC2636-10	LT	10+	DFN-14, MS-16	8-channel, 10-bit SPI Vout DAC with 10ppm/ºC reference
LM2636M	NS	08+	SOP24

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board

LT brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
LTC2631-10	LT	10+	SOT-23	Single 10-bit I2C Vout DAC with 10ppm/°C bidirectional reference
LTC2630-10	LT		SC-70	Single 10-bit rail-to-rail DAC with integrated reference in an SC70 package
LTC1669	LT	10+	SOT-23, MSOP-8	10-bit rail-to-rail micropower DAC with I2C interface
LTC1662	LT	10+	MSOP-8, N-8	Ultra-low power, dual 10-bit DAC in MSOP package
LTC1427-50	LT	10+	SO-8	Micropower, 10-Bit Current Output DAC with SMBus Serial Interface
LTC8143	LT	10+	N-16, SW-16	Improved Industry Standard Serial 12-Bit Multiplying DACs
LTC7545A	LT	10+	N-20, SW-20	Improved Industry Standard Parallel 12-Bit Multiplying DAC
LTC7543	LT	10+	N-16, SW-16	Improved Industry Standard Serial 12-Bit Multiplying DACs
LTC2755-12	lt	10+	QFN-64	Quad current output 12-bit SoftSpan DAC with parallel I/O
LTC2754-12	LT	10+	QFN-52	Quad 12-bit SoftSpan Iout DAC
LTC2753-12	LT	10+	QFN-48	Dual current-output 12-bit SoftSpan DACs for parallel I/O
LTC2751-12	LT	10+	QFN-38	Current output 12-bit SoftSpanTM DAC with parallel I/O
LTC2704-12	LT	10+	SSOP-44	Quad 12-bit voltage-output SoftSpan DAC with readback
LTC2657-12	LT	10+	QFN-20, TSSOP-20	LTC2657-12 - Octal I2C 12-bit rail-to-rail DAC with 10ppm/ºC maximum reference
LTC2654-12	LT	10+	QFN-20, SSOP-16	Quad, 12-bit, rail-to-rail DAC with 10ppm/ºC maximum reference
LTC2642-12	LT	10+	MS-10, DFN-10	12-bit Vout DAC in a 3mm × 3mm DFN package
LTC2641-14	lt	10+	MS-8, DFN-8	LTC2641-14 - 14-bit Vout DAC in a 3mm × 3mm DFN package
LTC2619	LT	10+	SSOP-16	LTC2619 - Quad 14-bit rail-to-rail DAC with I2C interface
LTC2616	LT	10+	DFN-10	LTC2616 - 14-bit rail-to-rail DAC with I2C interface
LTC2615	LT	10+	SSOP-16	LTC2615 - Octal, I2C, 16-bit rail-to-rail DAC in a 14-lead SSOP package