LTC2640-10

• Product introduction

LTC2640-10 single 10-bit SPI Vout DAC with 10ppm/°C reference

peculiarity

• integrationtargetAccurate benchmarking
  2.5V Full Scale 10ppm/°C (LTC2640-L)
  4.096V Full Scale 10ppm/°C (LTC2640-H)
• Maximum INL Error: 1LSB (LTC2640A-12)
• Bidirectional reference: input or 10ppm/°C output
• Low noise (0.7mV_P-P, 0.1Hz to 200kHz)
• Monotonic characteristics are guaranteed over the entire temperature range
• 2.7V to 5.5V Supply Range (LTC2640-L)
• Low Power Operation: 180μA at 3V
• Power Reduced to 1.8μA Max (C and I)
• Asynchronous DAC Clear Pin (LTC2640-Z)
• Power-on reset to zero scale or midscale options
• Double-buffered data latch
• Guaranteed operation over a temperature range of -40°C to 125°C (class H)
• 8-pin TSOT-23 (ThinSOT^TM) encapsulation

• description

  LTC^®The 2640 is a family of 12-, 10-, and 8-bit voltage-output DACs in an 8-pin TSOT-23 package with an integrated, high-accuracy, low-drift reference. It has a built-in rail-to-rail output buffer and is guaranteed monotonic.
  
  The LTC2640-L has a 2.5V full-scale output and operates from a single 2.7V to 5.5V supply. The LTC2640-H has a full-scale output of 4.096V and operates from a single 4.5V to 5.5V supply. A 10ppm/°C reference output is provided on the REF pin.
  
  Each DAC operates in an external reference mode, where a voltage supplied to the REF pin sets the full-scale output.
  
  THE LTC2640 DAC USES AN SPI/MICROWIRE^TMCompatible 3-wire serial interface that operates at clock frequencies up to 50MHz.
  
  The LTC2640 includes a power-on reset circuit. Options are available to reset to zero scale or reset to intermediate scale after power-up.

• apply

  • Mobile communications
  • Process control and industrial automation
  • Automatic test equipment
  • Portable devices
  • Car
  • Optical networks