LTM9003-AB

• Product introduction

LTM9003-AB12-bit digital predistortion μModule receiver subsystem

peculiarity

• Fully integrated receiver subsystem for digital predistortion (PDP) applications
• Downconverting mixer with wide RF frequency range: 400MHz to 3.8GHz
• 125MHz wide passband filter,
• Low power ADC with up to 12-bit resolution and 250Msps sample rate
• -145.5dBm/Hz input noise layer, 25.8dBm IIP3
• 1.5W total power consumption
• 50Ω single-ended RF and LO ports
• Internal bypass capacitors, no external components
• ADC clock duty cycle stabilizer
• 11.25mm x 15mm LGA package

description

LTM^® The 9003 is a 12-bit digital predistortion μModule^® The receiver subsystem for the transmit path of the cellular base station. The device uses an integrated system-in-package (SiP) technique that includes a downconverting mixer, wideband filter, and analog-to-digital converter (ADC). The system is adjusted for a 184MHz intermediate frequency (IF) and a signal bandwidth up to 125MHz. This 12-bit ADC has a sample rate of up to 250Msps. For custom configurations, please consult Linear Technology.

High signal level downconversion active mixers are optimized for high linearity, wide dynamic range IF sampling applications. It includes a differential LO buffer amplifier to drive a double-balanced mixer. Wideband, integrated converters on the RF and LO inputs provide a single-ended 50Ω interface. Internally match the RF and LO inputs to 50Ω from 1.1GHz to 1.8GHz.

The CLK input controls converter operation and can be driven differential or single-ended. An optional clock duty cycle stabilizer achieves high performance at full speed and multiple clock duty cycles.

apply

• Send observation path receiver
• Digital predistortion (DPD) receiver
• Broadband receiver
• Broadband meter