home page > Products > 高边驱动器智能功率开关
MAX9541
Product images are for reference only Request product details

MAX9541

  • 所属类别:高边驱动器智能功率开关
  • 产品名称:四路,2:1,复用放大器,标准清晰度和VGA信号
  • 厂商:maxim
  • 生产批号:11+
  • 封装:16-QSOP
  • 库存状态:有库存
  • 库存量:30000
  • 最低订购量:1
  • 详细资料:点击查找MAX9541的pdf资料
  • 点击询价
联系我们在线客服1 在线客服2 点击发送邮件
  • Product Introduction

MAX9541 

description

MAX9541/MAX9542 is a four-channel, 2:1 video multiplexer with input sync head clamp amplifier. These devices select two video sources between them and support up to 4 channels per source. MAX9541 standard-definition video signals with integrated low-pass filters such as composite and red, green, blue (RGB) are optimized. Filters typically have a ±1dB with 9.5MHz passband flatness and 47 dB attenuation at 27MHz. MAX9542 has a wider bandwidth of 15MHz because it does not have an integrated low-pass filter, it is suitable for not just standard definition video signals, but video graphics arrays (VGA), 640×480 resolution up to 85Hz refresh rate signals. The video signal is AC coupled to the input of MAX9541/MAX9542. Input the DC level inside the sync head clamp setting. The amplifier has a 2V/V gain and the output can be DC-coupled to a 75Ω load, which is equivalent to two video loads, or AC coupled to a 150Ω load. Simultaneously MAX9541/MAX9542 functionality with supply current reduced to 35μA low-power shutdown mode.

Key features:

    4. 2:1 video multiplexing amplifier     The reconstruction filter has a 9.5MHz passband and 47 dB attenuation at 27MHz (MAX9541).     The fixed gain is 2V/V     Enter the sync head clamp position     Shut down     Single supply from 2.7V to 3.6V

ICs related to MAX9541 include:


Model Manufacturers lot number encapsulation illustrate
MAX9541 maxim 11+ 16-QSOP Quad, 2:1, multiplex amplifier, standard definition and VGA signal
ICS954119DF ICS 07+ SSOP-56 New in stock
IRF9541 IR 10+ TO-220 TRANSISTOR | MOSFET | P-CHANNEL | 60V V(BR)DSS | 19A I(D) | TO-220AB
ICS954101DFLFT HIT 0815+ QFP  
ICS954105BF TI 06+ SOP8  
ICS954102AF TI 04+ sop  
ICS954101dtlft FUJ 98 SOP  
ICS954101dtlft S.I 07+ StOP8  
ICS954101 CYP 03+ SOP  

Popular searches


Model Manufacturers lot number encapsulation illustrate
V93BR Mors Smitt 24+ connector V93BR socket - screw terminals, rail mount 8 poles
V17-D MORSSMITT 24+ Relays The relay socket has spring terminals
VGE1TS181900L SOURIAU-SUNBANK 24+ connector Circular MIL Spec Backshells BACKSHELL SZ18
KEYSTONE26 Keystone Electronics 24+ connector EYELET 0.187" BRASS TIN PLATED
KPSE06E14-19SA206 ITT 24+ connector Conn Circular SKT 19 POS Crimp ST Cable Mount 19 Terminal 1 Port
KPSE06J14-19P ITT 24+ connector Circular MIL Spec Connector KPSE 19C 19#20 PIN PLUG
W-1-005-4STUD T&M 24+ DIP SERIES W - Stud Input - 4 Stud Type
ABBH2214SDAM AB Connectors 2024+ connector Connector tailpipe
C193A/24EV-U1 Schaltebao 25+ DIP Voltage 1100v electric current 50A contactor/advantage channel fast delivery
C195A/24EC-U2 Schaltebao 25+ DIP Contactor/Advantage channel fast delivery
D-U204-E Mors Smitt 24+ DIP Instantaneous relays
PW620-18d/2S/R/KS135 FSG 24+ DIP Stellungsferngeber position sensor potentiometer
ST1-DC12V-F Panasonic Electronic Components 24+ DIP Power Relay 12VDC 5DC/8AAC SPST-NO/SPST-NC(31mm 14mm 11.3mm) THT
MER1S1505SC Murata Power Solutions 24+ DIP DC DC CONVERTER 5V 1W
P783-Q24-S5-S CUI Inc 24+ DIP DC DC CONVERTER 5V 15W
9001-18321C00A Oupiin 24+ connector DIN41612 Half R Female 48 Pin
9001-18481C00A Oupiin 24+ connector DIN41612 Half R Female 48 Pin
CIR013106T01031819SCNP0406 ITT Interconnect Solutions 2023+ connector Standard Circular Connector
CIR013106T01031819SCYP0406 ITT Interconnect Solutions 24+ connector Standard Circular Connector
110IMX35D12D12-8G Bel Power Solutions 24+ Relays DC DC CONVERTER 12V 12V 12V 35W

Maxim brand product recommendation


Model Manufacturers lot number encapsulation illustrate
MAX9532 maxim 12+ 10-pin μMAX DirectDrive® Video Filter Amplifier
MAX9680 maxim 12+ SC70 Adopt the SC70 3V video amplifier with internal gain and filter
MAX6009 MAXIM 12+   1μA, SOT23 precision shunt voltage reference
MAX6008 MAXIM 12+   1μA, SOT23 precision shunt voltage reference
MAX6007 MAXIM 12+   1μA, SOT23 precision shunt voltage reference
MAX6006 MAXIM 12+   1μA, SOT23 precision shunt voltage reference
MAX6138C MAXIM 12+ SC70 0.1%, 25ppm more reverse breakdown voltage reference, SC70 package
MAX6138B MAXIM 12+ SC70 0.1%, 25ppm more reverse breakdown voltage reference, SC70 package
MAX6138 MAXIM 12+ SC70 0.1%, 25ppm more reverse breakdown voltage reference, SC70 package
MAX8069 MAXIM 11+ SOCI-8 1.2V reference voltage replacement ICL8069 with temperature compensation
MAX4222 MAXIM 12+ SOT23 It has a high slew rate, high output current driver
MAX4219 MAXIM 12+ SOT23 It has a high slew rate, high output current driver
MAX4217 MAXIM 12+ SOT23 It has a high slew rate, high output current driver
MAX4215 MAXIM 12+ SOT23 It has a high slew rate, high output current driver
MAX4214 MAXIM 12+ SOT23 It has a high slew rate, high output current driver
MAX4022 MAXIM 12+ SOT23 Accuracy, closed-loop gain of +2 (or -1) buffers feature high slew rates, high output current drivers, and low differential gain and phase errors.
MAX4019 MAXIM 12+ SOT23 Accuracy, closed-loop gain of +2 (or -1) buffers feature high slew rates, high output current drivers, and low differential gain and phase errors.
MAX4017 MAXIM 12+ SOT23 Accuracy, closed-loop gain of +2 (or -1) buffers feature high slew rates, high output current drivers, and low differential gain and phase errors.
MAX4014 MAXIM 12+ SOT23 Accuracy, closed-loop gain of +2 (or -1) buffers feature high slew rates, high output current drivers, and low differential gain and phase errors.
MAX4205 MAXIM 12+ SOT23 Ultra-high-speed, open-loop buffer with high slew rate, high output current, low noise, and excellent capacitive load driving capability

Taxonomic search