MCP6032-E/MS

所属类别：放大器和线性器件
产品名称：运算放大器
厂商：Microchip
生产批号：12+
封装：SMD/SMT
库存状态：有库存
库存量：5000
最低订购量：1
详细资料：

Product Introduction

MCP6032-E/MS Operational amplifiers

MCP6032 op amp (op amp) has a gain bandwidth of 10 kHz for a low typical operating current of 900 nA and a voltage with an offset of less than 150 microvolts. MCP6032 uses Microchip's advanced CMOS technology to provide rail-to-rail input and output swing with low bias current, high speed, high open-loop gain. MCP6032 can be as low as 1.8V from a single supply and less than 1 microamp quiescent current. MCP6032 is a standard 8-pin SOIC and MSOP package

Features Rail-to-Rail Input and Output Unity gain stable Low operating voltage Low quiescent current Low offset voltage

Microchip Centennial Electronic Technology - Professional Sensor Expert

ICs related to MCP6032-E/MS include:

Model	Manufacturers	lot number	encapsulation	illustrate
50V 6032 10uF±10% Tantalum Capacitor 10%	import	16+	SMD	50V 6032 10uF±10% Tantalum Capacitor 10%
VC060326A580RP	LITTELFUSE	12+	N/A	Electronic components
VC060326A580DP	LITTELFUSE	12+	N/A	Electronic components
VC060326A580DP??	LITTELFUSE	12+	N/A	Electronic components
VAR-18160320M5P-XK	LITTELFUSE	12+	N/A	Electronic components
MCP6032T-E/SN	Microchip	12+	SMD/SMT	Operational amplifiers
MCP6032T-E/MS	Microchip	12+	SMD/SMT	Operational amplifiers
MCP6032-E/SN	Microchip	12+	SMD/SMT	Operational amplifiers
MCP6032-E/MS	Microchip	12+	SMD/SMT	Operational amplifiers
LMC6032IN/NOPB		10+11+		Hong Kong spot, imported original
LMC6032IM/NOPB		10+11+		Hong Kong spot, imported original
LMC6032IMX/NOPB		10+11+		Hong Kong spot, imported original
CRCW060320K0FKEA	VISHAY/DALE	10+	N/A	Brand new original import, Hong Kong spot
LMC6032IN	National	04+	DIP-8	Brand new original
LMC6032IMX	NSC	09+	SOP-8	CMOS dual op-amp
CAPTA22U/20V(6032)+/-20_	Vishay	N／A	N／A	22UF20V/D
CY7C60323-PVXC	CYPRESS	07+	SSOP	Brand new original
TPS76032DBVT	TI	04+	5 pins	Low power 50mA low dropout 3.2V linear regulator
U6032B	TEMIC	00+	DIP-8	New original stock available
THS60321	TI	03+	SOIC-20(7.2mm)	Brand new original

Model	Manufacturers	lot number	encapsulation	illustrate
V93BR	Mors Smitt	24+	connector	V93BR socket - screw terminals, rail mount 8 poles
V17-D	MORSSMITT	24+	Relays	The relay socket has spring terminals
VGE1TS181900L	SOURIAU-SUNBANK	24+	connector	Circular MIL Spec Backshells BACKSHELL SZ18
KEYSTONE26	Keystone Electronics	24+	connector	EYELET 0.187" BRASS TIN PLATED
KPSE06E14-19SA206	ITT	24+	connector	Conn Circular SKT 19 POS Crimp ST Cable Mount 19 Terminal 1 Port
KPSE06J14-19P	ITT	24+	connector	Circular MIL Spec Connector KPSE 19C 19#20 PIN PLUG
W-1-005-4STUD	T&M	24+	DIP	SERIES W - Stud Input - 4 Stud Type
ABBH2214SDAM	AB Connectors	2024+	connector	Connector tailpipe
C193A/24EV-U1	Schaltebao	25+	DIP	Voltage 1100v electric current 50A contactor/advantage channel fast delivery
C195A/24EC-U2	Schaltebao	25+	DIP	Contactor/Advantage channel fast delivery
D-U204-E	Mors Smitt	24+	DIP	Instantaneous relays
PW620-18d/2S/R/KS135	FSG	24+	DIP	Stellungsferngeber position sensor potentiometer
ST1-DC12V-F	Panasonic Electronic Components	24+	DIP	Power Relay 12VDC 5DC/8AAC SPST-NO/SPST-NC(31mm 14mm 11.3mm) THT
MER1S1505SC	Murata Power Solutions	24+	DIP	DC DC CONVERTER 5V 1W
P783-Q24-S5-S	CUI Inc	24+	DIP	DC DC CONVERTER 5V 15W
9001-18321C00A	Oupiin	24+	connector	DIN41612 Half R Female 48 Pin
9001-18481C00A	Oupiin	24+	connector	DIN41612 Half R Female 48 Pin
CIR013106T01031819SCNP0406	ITT Interconnect Solutions	2023+	connector	Standard Circular Connector
CIR013106T01031819SCYP0406	ITT Interconnect Solutions	24+	connector	Standard Circular Connector
110IMX35D12D12-8G	Bel Power Solutions	24+	Relays	DC DC CONVERTER 12V 12V 12V 35W

Microchip brand product recommendations

Model	Manufacturers	lot number	encapsulation	illustrate
HCS201-I/P	MICROCHIP	12+	DIP	Rolling encryption chip
MCP6031DM-PTPLS	Microchip	12+	SMD/SMT	MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA with an offset voltage of less than 150 microvolts. MCP6031 uses Microchip's advanced CMOS technology to provide low bias current, high speed, high open-loop gain rail-to-rail input and output swing. MCP6031 can be as low as 1.8V from a single supply and less than 1 microamp of quiescent current. be
MCP6031T-E/SN	Microchip	12+	SMD/SMT	MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA with an offset voltage of less than 150 microvolts. MCP6031 uses Microchip's advanced CMOS technology to provide low bias current, high speed, high open-loop gain rail-to-rail input and output swing. MCP6031 can be as low as 1.8V from a single supply and less than 1 microamp of quiescent current. be
MCP6031T-E/OT	Microchip	12+	SMD/SMT	MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA with an offset voltage of less than 150 microvolts. MCP6031 uses Microchip's advanced CMOS technology to provide low bias current, high speed, high open-loop gain rail-to-rail input and output swing. MCP6031 can be as low as 1.8V from a single supply and less than 1 microamp of quiescent current. be
MCP6031T-E/MS	Microchip	12+	SMD/SMT	MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA with an offset voltage of less than 150 microvolts. MCP6031 uses Microchip's advanced CMOS technology to provide low bias current, high speed, high open-loop gain rail-to-rail input and output swing. MCP6031 can be as low as 1.8V from a single supply and less than 1 microamp of quiescent current. be
MCP6031T-E/MC	Microchip	12+	SMD/SMT	MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA with an offset voltage of less than 150 microvolts. MCP6031 uses Microchip's advanced CMOS technology to provide low bias current, high speed, high open-loop gain rail-to-rail input and output swing. MCP6031 can be as low as 1.8V from a single supply and less than 1 microamp of quiescent current. be
MCP6031-E/SN	Microchip	12+	SMD/SMT	MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA with an offset voltage of less than 150 microvolts. MCP6031 uses Microchip's advanced CMOS technology to provide low bias current, high speed, high open-loop gain rail-to-rail input and output swing. MCP6031 can be as low as 1.8V from a single supply and less than 1 microamp of quiescent current. be
MCP6031-E/MS	Microchip	12+	SMD/SMT	MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA with an offset voltage of less than 150 microvolts. MCP6031 uses Microchip's advanced CMOS technology to provide low bias current, high speed, high open-loop gain rail-to-rail input and output swing. MCP6031 can be as low as 1.8V from a single supply and less than 1 microamp of quiescent current. be
MCP6031-E/MC	Microchip	12+	SMD/SMT	MCP6031 op amp (op amp) has a gain bandwidth of 10 kHz with a low typical operating current of 900 nA with an offset voltage of less than 150 microvolts. MCP6031 uses Microchip's advanced CMOS technology to provide low bias current, high speed, high open-loop gain rail-to-rail input and output swing. MCP6031 can be as low as 1.8V from a single supply and less than 1 microamp of quiescent current. be
MCP6444T-E/ST	Microchip	12+	SMD/SMT	MCP6444 device is a four-nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. These devices operate from a single supply with a low voltage of 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444T-E/SL	Microchip	12+	SMD/SMT	MCP6444 device is a four-nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. These devices operate from a single supply with a low voltage of 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444-E/ST	Microchip	12+	SMD/SMT	MCP6444 device is a four-nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. These devices operate from a single supply with a low voltage of 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6444-E/SL	Microchip	12+	SMD/SMT	MCP6444 device is a four-nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. These devices operate from a single supply with a low voltage of 1.4V. These features make home op amps ideal for single-supply, battery-powered applications.
MCP6442T-E/MNY	Microchip	12+	SMD/SMT	MCP6442 device's dual nanopower op amp (op amp) features low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442T-E/SN	Microchip	12+	SMD/SMT	MCP6442 device's dual nanopower op amp (op amp) features low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442T-E/MS	Microchip	12+	SMD/SMT	MCP6442 device's dual nanopower op amp (op amp) features low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442-E/SN	Microchip	12+	SMD/SMT	MCP6442 device's dual nanopower op amp (op amp) features low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6442-E/MS	Microchip	12+	SMD/SMT	MCP6442 device's dual nanopower op amp (op amp) features low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. The device operates from a single supply voltage as low as 1.4V. These features make home op amps ideal for single-supply, battery-powered applications
MCP6441T-E/OT	Microchip	12+	SMD/SMT	MCP6441 device is a single nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. These devices operate from a single supply with a low voltage of 1.4V. These features make home op amps ideal for single-power sources, batteries
MCP6441T-E/LT	Microchip	12+	SMD/SMT	MCP6441 device is a single nanopower operational amplifier (op amp) with low quiescent current (450 nA, typical) and rail-to-rail input and output operation. The op amp is a stable gain bandwidth product of 9 kHz (typical) per unit gain. These devices operate from a single supply with a low voltage of 1.4V. These features make home op amps ideal for single-power sources, batteries

MCP6032-E/MS

ICs related to MCP6032-E/MS include:

Popular searches

Microchip brand product recommendations

Taxonomic search

Related Links