MIC28510 Ultra-high-speed control synchronous buck regulator
This is an adjustable frequency MIC28510 switching, synchronous buck regulator with a unique adaptive real-time control structure.
The standard operating MIC28510 input range provides an output to an output current for electrolysis.
The output voltage can be adjusted down by 0.8V to ensure accuracy ±1%.
The switched ultra-high-speed control architecture allows for ultra-fast transient response while reducing the output capacitance also enables (high V.)/(low operation possible).
This adaptability combines the advantages of a pulsation control architecture with fixed frequency operation and fast transient response in a single unit.
The MIC28510 offers a full set of protection features to ensure protection against IC fault conditions.
These include undervoltage lockout to ensure power-sag under normal operating conditions, internal soft start to reduce inrush current, current limiting, "hiccup" mode, short circuit protection, thermal shutdown.
|
|
peculiarity
|
|
|
|
-
超高速控制™架构使：
-
高三角洲五操作（V = = 0.8v电解电压）
-
输出电容小
-
标准对电解电压输入
-
一个输出电流能力，效率达95%
-
可调输出到0.8v
-
1%全精度
-
任何™ 稳定电容器
-
100 kHz到500 kHz开关频率
-
内部补偿
-
折返电流限制和“打嗝”模式短路保护
-
热关断
-
支持安全启动到一个预偏置负载
-
40°℃至+ 125℃温度范围°路口
-
28-pin 5×6毫米-®包