MSP430F5418IPNR

illustrate

Texas Instruments' MSP430 ultra-low-power microcontroller family includes multiple devices with peripheral sets for a variety of different applications. The architecture, combined with five low-power modes, is optimized to extend battery life in portable measurement applications. The device has a powerful 16-bit RISC CPU, 16-bit registers, and contributes to maximum code efficiency constantly. The digitally controlled oscillator (DCO) allows wake-up from low-power mode in active mode in no more than 5 microseconds.

The MSP430F543x with the MSP430F541x series are three 16-bit timers, a high-performance microcontroller configured 12-bit analog-to-digital (A/D) converter, four Universal Serial Communication Interface (USCI), hardware multiplier, DMA, true real-time clock module with alarm functions, and up to 87 I/O pins.

characteristic

• Low supply voltage range: 2.2 V to 3.6 V
• Ultra-low power consumption
  • Active Mode (AM):
    All system clock activity
    312 μA/MHz at 8 MHz, 3.0 volts, flash program execution (typical)
    Program execution at 140 μamps/MHz at 8 MHz, 3.0 volts, RAM (typical)
  • Standby mode (LPM3):
    Real-time clock crystals, watchdogs and power monitoring services,
    RAM remains intact and wakes up quickly:
    3.0 V typical at 2.6 μA
    Low Power Oscillator (VLO), General Purpose Counter, Watchdog,
    and Supply Executive Business,
    RAM remains intact and wakes up quickly:
    3.0 V typical at 1.8 μA
  • Shutdown mode (LPM4):
    RAM remains intact, supply the competent business, wake up quickly:
    3.0 V typical at 1.69 μA
• Standby mode with wake-up time less than 5μs
• 16-bit RISC architecture
  • Memory expansion
  • Up to 18 MHz system clock
• Flexible power management system
  • Fully integrated LDO regulation with programmable core supply voltage
  • Power supply voltage monitoring, monitoring, and power loss
• Unified clock system
  • FLL stabilizes control loop frequency
  • Low-Power/Low-Frequency Internal Clock Source (VLO)
  • Low frequency side internal reference source (REFO)
  • 32 kHz crystal
  • High frequency crystals up to 32 MHz
• 16-bit timer TA0 with five Timer_A capture/compare registers
• The 16-bit timer TA1 has three Timer_A capture/compare registers