OPA357
Product images are for illustrative purposes only
Product details are welcome upon request

OPA357

  • Category:JFET/CMOS
  • Product Name:250MHz rail-to-rail I/O single CMOS op amp with off-state
  • Manufacturers:TI
  • Production Batch Number:08+
  • Encapsulation:6SOT-23, 8SO PowerPAD
  • Stock Status:There is stock
  • Stock Quantity:5000
  • Minimum order quantity: 1
  • Details:Click here to find the PDF of OPA357
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

In the high-speed OPA357 family, voltage feedback op amps are CMOS designed for video and other applications that require high bandwidth. They are unity-gain stable and can drive large output currents. The differential gain and differential phase of 0.02% is 0.09°. Quiescent current is only 4.9 mA per channel.

The OPA357 series of op amps are optimized for operation down to 2.5V with single or dual supplies (± 1.25V) and up to 5.5V (± 2.75V). The common-mode input range is out of supply. Tracks with output swings of 100mV support for wide dynamic range.

For applications requiring full current with a continuous output of 100mA, the single SO-8 will be a PowerPAD version.

The stand-alone version (OPA357) comes from the miniature SOT23-6 and SO-8 PowerPAD packages.

characteristic
  • Unity-gain bandwidth: 250MHz
  • Wide bandwidth: GBW of 100MHz
  • High slew rate: 150V/μs
  • Low Noise: 6.5nV / hertz
  • Rail-to-rail I/O
  • High output current: > 100mA
  • Excellent video performance:
    Differential gain: 0.02%, phase error: 0.09°
    0.1dB gain flatness: 40MHz
  • Low input bias current: 3pA
  • Quiescent current: 4.9 mA
  • Thermal shutdown
  • Supply voltage range: 2.5V to 5.5V
  • Shut me downQ
  • smallSize and will be PowerPAD™ package
  • apply
    • Video processing
    • ultrasonic
    • Fiber optic network, tunable laser
    • Provincial photodiode resistance
    • Active filters
    • High-speed integrator
parameter
    OPA357
IQ per channel (max.) (mA)   7.5
Slew rate (typical) (V/US)   150
GBW (typical) (MHz)   100
Rail railway   Input, output
Ganymede (typical) (mAh)   100
and (min) (v)   2.5
and (maximum) (v)   5.5
Number of channels   One
Pins/Packets   6SOT - 23,8SO will be PowerPAD
ACL, the minimum stable gain (V/V).   One
ACL (MHz) of weight @   250
Differential Gain(%)   0.02
Phase error (degrees)   0.09
Violet (maximum) (millivolts)   8
Total harmonic distortion (CFC = 1 MHz) (typical) (dB)   -74
Settling time (0.1%) (typical) (nanoseconds)   30
Maximum offset voltage drift (+/-)((UV/Celsius)   4
Available channels   Seconds, D
(typical) in the flat band Vn (Nevada/rtHz)   6.5
About. Price (USD)   0.70 | per thousand
Explosion protection (max.) (North America)   0.05
Noninverting Input Current Noise (Yearly/rtHz)   0.05
Second harmonic (DBC).   75
Third harmonic (DBC).   83
@兆赫   One
Weight @ g = 2 (MHz)   90
0.1 dB bandwidth flatness (MHz)   40
Crosstalk (-dB).    
Operating temperature range(°C)   -40 to 125

andOPA357Related ICs are:


Model Manufacturers lot number encapsulation illustrate
OPA653 TI 09+ 5SOT-23, 8SON Download - PDF icon Wideband, fixed gain, JFET input amplifier
OPA4354 TI 09+ 14SOIC, 14TSSOP 250MHz rail-to-rail I/O CMOS quad operational amplifier
OPA361 TI 08+ 6SC70 3V video amplifier with internal gain and filter
OPA360 TI 07+ 6SC70 3V video amplifier with low-pass filter, internal G=2, and SAG correction in SC70 package
OPA358 TI 10+ 6SC70 3V single-supply 80MHz high speed operational amplifier in SC70 package
OPA356-Q1 TI 10+ 5SOT-23 Automotive 2.5V, 200MHz GBW, CMOS single op amp
OPA356 TI 09+ 5SOT-23, 8SOIC 2.5V 200MHz GBW CMOS single op amp
OPA354A-Q1 TI 10+ 5SOT-23 250 MHz, rail-to-rail I/O, CMOS op amp
OPA354 TI 10+ 5SOT-23, 8SO PowerPAD 250MHz rail-to-rail I/O CMOS single op amp
OPA3355 TI 10+ 14SOIC, 14TSSOP GBW CMOS triple op amp with 2.5V 200MHz in shutdown state

Popular searches


Model Manufacturers lot number encapsulation illustrate
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62 ABB 2016+ Contactors 4P St Contactor Relay 77-143Vdc |Abb TNL22ERT-62
62EM1-00001 Microchip 2023+ Development board AgileSwitch® 62mm Electrical Master SiC Gate Driver Board
E2E-X7D212-R2M Omron 2023+ sensor Standard Proximity Sensor
E2E-X7D212-R5M Omron 2023+ sensor Standard Proximity Sensor

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
OPA356-Q1 TI 10+ 5SOT-23 Automotive 2.5V, 200MHz GBW, CMOS single op amp
OPA356 TI 09+ 5SOT-23, 8SOIC 2.5V 200MHz GBW CMOS single op amp
OPA354A-Q1 TI 10+ 5SOT-23 250 MHz, rail-to-rail I/O, CMOS op amp
OPA354 TI 10+ 5SOT-23, 8SO PowerPAD 250MHz rail-to-rail I/O CMOS single op amp
OPA3355 TI 10+ 14SOIC, 14TSSOP GBW CMOS triple op amp with 2.5V 200MHz in shutdown state
OPA2357 TI 10+ 10MSOP 250MHz rail-to-rail I/O dual CMOS operational amplifier with off-state
OPA2356 TI 10+ 8MSOP, 8SOIC 2.5V 200MHz GBW CMOS dual operational amplifier
OPA2355 TI 10+ 10MSOP 2.5V 200MHz GBW CMOS dual op amp with shutdown state
OPA2354A-Q1 TI 10+ 8MSOP Automotive 250MHz rail-to-rail I/O CMOS dual operational amplifiers
OPA2354-Q1 TI 10+ 8MSOP Automotive 250MHz rail-to-rail I/O CMOS dual operational amplifiers
OPA2354 TI 09+ 8MSOP, 8SO PowerPAD 250MHz rail-to-rail I/O CMOS dual operational amplifier
THS6226 TI 10+ 32QFN Class H fixed gain VDSL2 dual-port low-power xDSL line driver
THS6214 TI 10+ 24HTSSOP, 24VQFN Dual-port VDSL2 line driver amplifier
THS6204 TI 09+ 8SO PowerPAD, 8SOIC Dual high voltage low distortion current feedback operational amplifiers
OPA2684 TI 10+ 8SOIC, 8SOT-23 Dual low-power current feedback op amps
OPA2673 TI 10+ 16VQFN Dual, wideband, high output current op amp with active shutdown online control
OPA2670 TI 10+ 8HSOP, 8SOIC Single-port, high output current VDSL2 line driver with power control
OPA2613 TI 08+ 8HSOP, 8SOIC Dual wideband high output current op amp with current limiting
DRV1101 TI 08+ 8SOIC High power differential line drivers
THS6184 TI 10+ 20HTSSOP, 24VQFN xDSL line drivers

Categorical search